Hardware - HEWI

Emergency Door Fittings | Panic Bar | Stainless Steel
Softlink
Item Number
Dimensions in mm / Specification
EN 1125
Tested and certified
for doors in panic or
emergency.
C2K4E
15
Center to center
New
PS160XA11.01
PS160XA11.02
PS160XA11.03
PS160XA11.04
PS160XA11.00
PS160XA12.01
PS160XA12.02
PS160XA12.03
PS160XA12.04
PS160XA12.00
PS160XA13.01
PS160XA13.02
PS160XA13.03
PS160XA13.04
PS160XA13.00
HEWI Panic bar according to EN 1125
made of stainless steel, surface finish Textured (A), with 9 mm through
square spindle, push-bar made from tubular stainless steel ø 25 mm,
with handle bar made from high-quality polyamide ø 30 mm, or handle
bar made from stainless steel ø 30 mm, two gear units with stainless
steel cover cap, push-bar extendable to the required mounting distance,
c to c 761 - 860 mm
ditto, c to c 861 - 1010 mm
ditto, c to c 1011 - 1160 mm
ditto, c to c 1161 - 1250 mm
ditto, shorter push-bar on customers request*
with 9 mm split square spindle 72.3PS,
ditto, c to c 761 - 860 mm
ditto, c to c 861 - 1010 mm
ditto, c to c 1011 - 1160 mm
ditto, c to c 1161 - 1250 mm
ditto, shorter push-bar on customers request*
with one-sided 9 mm spindle 72.9PS
ditto, c to c 761 - 860 mm
ditto, c to c 861 - 1010 mm
ditto, c to c 1011 - 1160 mm
ditto, c to c 1161 - 1250 mm
ditto, shorter push-bar on customers request*
Material | Surface | Colour
Push-bar made of tubular stainless steel
Textured
Handle bar:
pure white (99), anthracite grey (92), jet black (90),
meadow green (73) and stainless steel (A).
Escape- | Framed door lever handle
Attention!
To fulfil the EN 1125 requirements, the panic bar
may only be used with certified locks made by the
lock manufacturers Assa Abloy, BMH, Fuhr, KFV
and Wilka - for further details on the certified lock
manufacturers, see www.hewi.com.
Changes in length beyond a mounting distance of
1250 mm (door width 1300 mm), cease to conform
to the EN 1125 requirements and therefore no longer
have CE approval!
128 | HEWI Hardware