20.12.2013 Views

Heatlock ESB2, Electric Sprue Bushing

Heatlock ESB2, Electric Sprue Bushing

Heatlock ESB2, Electric Sprue Bushing

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

This <strong>Heatlock</strong> series, below, is currently being replaced by the A1-series of nozzles.<br />

Before you design check availability, stock is gradually decreased.<br />

Spare parts will be available until at least end of 2007 (apart form NPT1 bodies)<br />

ESB1<br />

5,5<br />

Part No. Watt Polarity<br />

B028013180 180 black (red) +<br />

14<br />

9<br />

1<br />

When temperatures of 250-260°C and above are needed it may be advantegous<br />

to install a band heater at the back end. This is also the case when shear sensitive<br />

materials are to be molded.<br />

Används när en jämn temperatur längs hela bussningen eftersträvas.<br />

R38<br />

15<br />

24<br />

29 DIN 912 - M5 x 25<br />

10<br />

(20)<br />

Cavity instructions for bushes with or without bandheater B055020180.<br />

Håltagning för bussning med eller utan bandelement B055020180.<br />

37.5<br />

R22.5<br />

50<br />

4xR10<br />

30<br />

Utgång för kabel<br />

Slot for cable<br />

Kabelnut<br />

Prior to any assembly refer to our latest<br />

assembly instruction, always available on our<br />

web site www.heatlock.com<br />

more<br />

Date: 030928, © LKM <strong>Heatlock</strong> Co Ltd<br />

2.01.3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!