washing machine user's manual es-v80ha - Sharp Australia Support

CHAPTER -10: TROUBLESHOOTING
FAULT
Excessive foam is
formed in the
detergent drawer.
Unsatisfactory
washing result.
POSSIBLE CAUSE
Excessive amount of
detergent used.
Wrong detergent
used..
The contamination
degree of your
laundries does not
match the programme
you have chosen.
Amount of detergent
used insufficient.
Laundries in excess
of maximum capacity
put in your machine.
REMOVING
METHODS
Press on Start/Pause
button. To eliminate
foam formation, mix a
spoon of softener with
half litres of water,
and pour the mixture
in the detergent
drawer. After 5-10
minutes, press on
Start/Pause button
again. In next
washing operation,
decide the dose of
detergent as required.
Use detergents
produced only for
automatic washing
machines in your
machine.
Select the programme
appropriate for the
contamination degree
of your laundries. (see
programme table)
Adjust the amount of
detergent based on
the amount and
contamination degree
of your laundries.
Load your machine
with laundries,
amount of which will
not exceed maximum
laundry capacity
44