10.0. special tools for saxophone E 2012-woodwind
10.0. special tools for saxophone E 2012-woodwind
10.0. special tools for saxophone E 2012-woodwind
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6<br />
E-Mail: boehm<strong>tools</strong>@t-online.de web: www.boehm<strong>tools</strong>.de<br />
TOOLS FOR WOODWIND INSTRUMENTS<br />
10.0 SPECIAL TOOLS FOR SAXOPHONE<br />
BENT DENT RODS WITH BALLS FOR SAXOPHONES<br />
Used <strong>for</strong> removing dents from <strong>saxophone</strong> bows. The rods have one straight and one curved end, both ends are threaded,<br />
as are the egg-shaped dent balls.<br />
-597/1- bent dent rod, with ball <strong>for</strong><br />
alto <strong>saxophone</strong>,M10.<br />
-597/2- bent dent rod, with ball <strong>for</strong><br />
tenor <strong>saxophone</strong>,M10.<br />
GROOVED DENT BALLS FOR SAXOPHONES<br />
These balls are drum-shaped, with a groove, so that they can be slipped past the octave tube.<br />
-596- grooved dent balls, thread M 10, set of 2 pieces, <strong>for</strong> alto and tenor <strong>saxophone</strong>.<br />
The balls fit onto the end of dent rod no. 597 or rod no.027/2-3.<br />
596<br />
SAX DENT BALLS<br />
Threaded egg-shaped balls <strong>for</strong> removing dents from <strong>saxophone</strong> bows.<br />
To be used with nos. 597, 015/3 -4 or no.027/2-3.<br />
Order the set of 3 or individually.<br />
-599- sax dent balls, set of 3 pieces <strong>for</strong> alto, tenor and baritone.<br />
-599/1- sax dent ball <strong>for</strong> alto, thread M10 and M12<br />
-599/2- sax dent ball <strong>for</strong> tenor, thread M10 and M12<br />
-599/3- sax dent ball <strong>for</strong> baritone thread M10 and M12<br />
PRESSING TOOL FOR SOLID HINGE TUBES.<br />
With this tool you can make solid hinge tubes slightly longer.<br />
-692- pressing tool <strong>for</strong> solid hinge tubes,<br />
half shells hardened, <strong>for</strong> hinge tubes<br />
dia 3.5/4.0/4.5/ 5.0 mm (sax, clarinet,<br />
bassoon).<br />
692<br />
- 1 - (<strong>10.0.</strong> <strong>tools</strong> <strong>for</strong> <strong>woodwind</strong> instruments 12/13)<br />
597<br />
599/1-3
6<br />
E-Mail: boehm<strong>tools</strong>@t-online.de web: www.boehm<strong>tools</strong>.de<br />
CONE-SHAPED DENT BALLS FOR SAX<br />
These cone-shaped "balls" are slightly curved so that dents in<br />
sax bodies are pushed out more easily. Also used <strong>for</strong><br />
straightening sax bodies. The sizes of the cones are overlapping<br />
-691S- cone-shaped dent balls <strong>for</strong> soprano sax, 5 pieces,<br />
with extension rod<br />
-691AT- cone-shaped dent balls <strong>for</strong> alto and tenor, 7 pieces,<br />
with extension rod<br />
-691AT/ESB- cone shaped dent balls, set of 3 pc , <strong>for</strong> baritone sax.<br />
Enlarges set 691AT up to baritone sax<br />
(delivery without extention rod)<br />
TAPERED MANDRELS FOR SAXOPHONES<br />
Mandrels <strong>for</strong> removing dents from <strong>saxophone</strong> bodies. The mandrels have a groove on the end<br />
<strong>for</strong> the octave tube so that the mandrel can be used in its entire length.<br />
-595/0- mandrel <strong>for</strong> soprano <strong>saxophone</strong><br />
-595/1- mandrel <strong>for</strong> alto <strong>saxophone</strong><br />
-595/2- mandrel <strong>for</strong> tenor <strong>saxophone</strong><br />
-595/3- mandrel <strong>for</strong> baritone <strong>saxophone</strong><br />
HOLDING VISE FOR TAPERED MANDRELS AND RODS<br />
This stable vise firmly holds tapered mandrels and rods slightly at an upward angle,<br />
thus making the work on the instrument easier <strong>for</strong> you. The use of this vise eliminates<br />
any downward movement or yielding of the tool during operation.<br />
-170 - holding vise <strong>for</strong> tapered mandrels<br />
and rods. To be screwed onto the work bench.<br />
- 2 - (<strong>10.0.</strong> <strong>tools</strong> <strong>for</strong> <strong>woodwind</strong> instruments 12/13)<br />
691AT<br />
595/0-2<br />
170
6<br />
E-Mail: boehm<strong>tools</strong>@t-online.de web: www.boehm<strong>tools</strong>.de<br />
BELL IRONS FOR SAXOPHONES<br />
These bell irons are extra narrow <strong>for</strong> exact fit on the bell flare. An ideal tool <strong>for</strong> removing dents in sax bells.<br />
Use with burnishers or a handroller (nos .081, 064A or 067)<br />
-517/0- bell iron <strong>for</strong> soprano <strong>saxophone</strong><br />
-517/1- bell iron <strong>for</strong> alto <strong>saxophone</strong><br />
-517/2- bell iron <strong>for</strong> tenor <strong>saxophone</strong><br />
-517/31- bell iron <strong>for</strong> baritone <strong>saxophone</strong> <strong>for</strong><br />
bell dia 172mm (Selmer/Yamaha)<br />
-517/32- bell iron <strong>for</strong> baritone <strong>saxophone</strong> <strong>for</strong><br />
bell dia 185mm<br />
517/0 -3<br />
DENT REMOVAL RINGS FOR SAX BOW<br />
These <strong>tools</strong> make it a lot easier <strong>for</strong> you to remove dents from sax bows. Very often you will not have to unsolder the guard.<br />
The half-ring with ball shaped face is inserted into the instrument, then a straight rod with thread is screwed in and then fixed<br />
in a vise. The dent is removed by pressing the bow onto the ring. Rings fit straight rod no. 027/2 or 027/3.<br />
-594/1- dent removal ring <strong>for</strong> alto <strong>saxophone</strong>,<br />
with thread M12.<br />
-594/2- dent removal ring <strong>for</strong> tenor <strong>saxophone</strong>,<br />
with thread M12.<br />
Straight rods with thread are not included.<br />
You have to order them extra.<br />
-027/2- straight rod, 17mm dia., 1000mm long,<br />
with threads M10 and M12.<br />
-027/3- straight rod, 20mm dia., 1000mm long,<br />
with threads M10 and M12.<br />
PAD IRONING TOOLS<br />
Made of rust-free, hardened spring steel ,<br />
5 mm thick.<br />
These <strong>tools</strong> are used <strong>for</strong> smoothing the skin of pads.<br />
-537/2- pad ironing tool <strong>for</strong> <strong>saxophone</strong> (soprano to tenor), set of 7 pc.<br />
-537/3- pad ironing tool <strong>for</strong> baritone <strong>saxophone</strong>, set of 2 pc.<br />
(makes set 537/2 a complete set <strong>for</strong> soprano to baritone sax).<br />
537/3<br />
- 3 - (<strong>10.0.</strong> <strong>tools</strong> <strong>for</strong> <strong>woodwind</strong> instruments 12/13)<br />
For rolling dent <strong>tools</strong> see<br />
„5.0. <strong>tools</strong> <strong>for</strong> brass instruments“<br />
594/1-2 with rod 027/2<br />
537/2
6<br />
E-Mail: boehm<strong>tools</strong>@t-online.de web: www.boehm<strong>tools</strong>.de<br />
SAX NECK EXPANDER<br />
This apparatus is used on loose- fitting sax necks (and flute head joints and main bodies ) to correct the fit quickly and<br />
ef<strong>for</strong>tlessly. Our expander is precision-made and quality controlled- the faces of the rollers are completely parallel.<br />
This is the precondition <strong>for</strong> optimal results.<br />
No.554 is a “must” <strong>for</strong> <strong>woodwind</strong> repair shops!<br />
-554- expander <strong>for</strong> <strong>saxophone</strong> necks (alto,tenor, baritone) and flutes.<br />
-554S expander <strong>for</strong> soprano-sax only<br />
Working with no. 554S<br />
Working with no.554<br />
SHRINKING TOOL FOR SAX NECK<br />
This tool shrinks loose-fitting sax necks to the exact size.<br />
It is supplied with slotted sleeves so that it can be used on both alto and tenor necks. A very stable and useful tool.<br />
-690/1- shrinking tool , complete with 7 pc. interchangeable sleeves<br />
<strong>for</strong> sax necks, alto and tenor, dia 24,0- 27,7mm<br />
-690/4- Additional sleeves <strong>for</strong> 690/1, 3pc dia 22,0-23,0 <strong>for</strong> baritone (no picture)<br />
-690/5- Additional sleeves <strong>for</strong> 690/1,4pc dia 27,85-28,45mm, “Vintage” sizes (no picture)<br />
Specials sleeve sizes <strong>for</strong> no.690/1 on request.<br />
For shrinking Sopran-S please use shrinking tool no.685 (<strong>for</strong> flutes) with smaller collets no. 685/1<br />
(Please see “8.0. Special <strong>tools</strong> <strong>for</strong> Flute”).<br />
- 4 - (<strong>10.0.</strong> <strong>tools</strong> <strong>for</strong> <strong>woodwind</strong> instruments 12/13)<br />
690/1<br />
SOLDERING PLIERS WITH ADJUSTABLE LEGS<br />
These pliers are extremely useful when you have to do soldering jobs on keys <strong>for</strong> <strong>woodwind</strong> or on parts <strong>for</strong> brass.<br />
The adjustable legs are quickly and firmly fixed, and the part is held at the most convenient position. The heavy<br />
base gives this tool a stable hold. The holding pliers are exchangeable easily.<br />
You need two <strong>tools</strong> <strong>for</strong> soldering jobs on keys.<br />
-427/2- soldering pliers,<br />
leg with two joints<br />
-427/3- replacement pliers<br />
554<br />
427/2
6<br />
E-Mail: boehm<strong>tools</strong>@t-online.de web: www.boehm<strong>tools</strong>.de<br />
TONE HOLE LEVELLING TOOLS FOR SAX<br />
This tool set is used <strong>for</strong> improving the pad seat by filing the tone hole perfectly flat.<br />
It consists of steeldisks, toothed and hardened, and interchangeable plastic pilots (no risk of scratching the instrument).<br />
Our set works on alto through baritone and can be used as a hand tool or can be screwed on a bolt and used in a spindle<br />
(nos. 501, 505/2) or lathe. It works equally well with clockwise and counter-clockwise rotation. Notice: No 593/0 is used<br />
only as a hand tool.<br />
-593- tone hole levelling tool <strong>for</strong> sax,<br />
toothed and hardened,<br />
set of 5 pieces of steeldisks and<br />
interchangeable plastic pilots.<br />
Also available singly:<br />
-593/0- tone hole levelling tool (19+24mm dia.)<br />
<strong>for</strong> tone hole 13-21mm dia, with 9 pilots<br />
-593/1- tone hole levelling tool (32mm dia.)<br />
<strong>for</strong> tone hole 20-29mm dia., with 10 pilots<br />
-593/2- tone hole levelling tool (38mm dia.)<br />
<strong>for</strong> tone hole 27-35mm dia., with 9 pilots<br />
-593/3- tone hole levelling tool (48mm dia.)<br />
<strong>for</strong> tone hole 34-45mm dia., with 12 pilots<br />
-593/4- tone hole levelling tool (59mm dia.)<br />
<strong>for</strong> tone hole46-56mm dia., with 5 pilots<br />
DISCS FOR SAX TONE HOLES AND KEYS<br />
For planing the tone holes and the keys (without pads) of <strong>saxophone</strong>s<br />
you can use these hardened and grinded steel discs.<br />
You work with a hammer on the discs.<br />
-693- discs <strong>for</strong> sax tone holes and keys,<br />
Set of 7 pieces dia 19mm to 59mm.<br />
Hardened and grinded.<br />
693<br />
- 5 - (<strong>10.0.</strong> <strong>tools</strong> <strong>for</strong> <strong>woodwind</strong> instruments 12/13)<br />
593/0-4
6<br />
INSPECTION LAMP (FOR FLUTE-SAXOPHONE)<br />
Mostly used <strong>for</strong> alto-,tenor- and baritone- <strong>saxophone</strong>.<br />
E-Mail: boehm<strong>tools</strong>@t-online.de web: www.boehm<strong>tools</strong>.de<br />
-578- leak light with fluorescent tube and bulb. For<br />
<strong>saxophone</strong>s and flutes. Complete with -220 V plug<br />
trans<strong>for</strong>mer, - 1 fluorescent tube, -1 bulb, -2 cords<br />
(bulb and tube can be used at the same time)<br />
-578/1- replacement fluorescent tube, complete with cable<br />
and plug (ready <strong>for</strong> use)<br />
-578/11- fluorescent tube (without cable and plug)<br />
-578/2- replacement bulb<br />
-578/4- LED-unit, flexible,<br />
long cable.<br />
A very good leak light<br />
<strong>for</strong> baritone!<br />
SAXOPHONE DISC<br />
This disc is a holder <strong>for</strong> <strong>saxophone</strong>s (and<br />
other instruments with a bell diameter<br />
from 100mm to 160mm, trumpet to<br />
fluegelhorn) during repair work, polishing<br />
and inspection.<br />
It can be turned radially and vertically and<br />
is firmly and quickly locked in position by<br />
two levers. Five rubber-protected clamps<br />
ensure a firm and non-marring grip of the<br />
bell rim.<br />
578/4<br />
-590/1- disc <strong>for</strong> <strong>saxophone</strong>s, with<br />
base plate, <strong>for</strong> mounting on<br />
workbench; adjustable in<br />
two axes (radially and<br />
vertically).<br />
-590/2- disc <strong>for</strong> <strong>saxophone</strong>s, with square base <strong>for</strong> clamping in vise or no. 170;<br />
adjustable in one axis (radially).<br />
DENT RODS FOR SAX NECKS<br />
Used <strong>for</strong> removing dents from sax necks.Order the set of 3 or individually.<br />
-598A- dent rods (threaded) <strong>for</strong> sax neck, with balls (threaded).<br />
Set of 3 <strong>for</strong> alto and tenor sax.<br />
The balls are mutually interchangeable.<br />
-598/0- <strong>for</strong> alto/tenor-only narrow side<br />
-598/1- <strong>for</strong> alto <strong>saxophone</strong><br />
-598/2- <strong>for</strong> tenor <strong>saxophone</strong><br />
- 6 - (<strong>10.0.</strong> <strong>tools</strong> <strong>for</strong> <strong>woodwind</strong> instruments 12/13)<br />
598A<br />
578<br />
590