3.0. holders-copying jig E 2012-woodwind

2
TOOLS FOR WOODWIND INSTRUMENTS
3.0.HOLDERS – COPYING JIG
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
HOLDER FOR CLARINET/OBOE
For clamping to the workbench.
One peg is removable so that it can be used as an ordinary support, too.
-575H- holder for clarinet and oboe and flute,
with removable pegs.
HOLDER FOR FLUTES AND CLARINETS
With these holders you can clamp flute main bodies and foot joints, and clarinet
upper and lower joints firmly in a vise; particularly useful for assembly and buffing.
-555B+K- holders, set of 2 pc, for flute and clarinet
-555B- holder for flutes
-555K- holder for clarinets
HOLDER FOR WOODWIND INSTRUMENTS
This holding jig is extremely useful when you have to drill a tone hole
in a clarinet, oboe, recorder etc. It is mounted on the table of a drilling
machine and holds the instrument firmly and securely. It is adjustable in
length, so it holds instrument parts from 150mm to 360mm! The pegs
551A
are interchangeable - the conical pegs can be replaced by conical sleeves
which hold the instrument from the outside, thus minimizing the danger of splitting very thin or weak wood. Of course, you
can also place this jig on the workbench and use it as an ordinary holder, for this purpose we supply two plastic buffers which
allow you to use it for flutes, too.
-551A- holder for woodwind instruments,
for instrument parts from 150 to 360mm; complete
with 2 conical pegs, 1 conical sleeve, 2 plastic buffers.
- 1 - ( 3.0. tools for woodwind instruments 12/13)
555B-555K
575

2
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
BIAXIAL HOLDER FOR WOODWIND INSTRUMENTS
This biaxial holding jig makes drilling tone and key post holes, milling grooves for flat springs, etc. a lot easier for you. It is
mounted on the table of a drilling machine and holds the instrument firmly and securely.
The instrument can be moved in the longitudinal axis (x) by hand or through gear-rack-drive ( a toothed wheel), by turning
the set screw it can be moved in the lateral axis (y). The movement in the lateral axis is controlled by means of a dial. A lever
locks the jig firmly in any position. Our holding jig is adjustable in length, so it holds instrument parts from 150 to 380mm.
551BZ
-551BZ- biaxial holding jig for woodwind instruments, for instrument parts from
150 to 380mm; complete with 3-jaw-chuck (opens up to 32mm dia),
with scale ring 360°, with gear-rack-drive (toothed wheel), dial.
Holding jig for longer instrument parts on request.
Price only on request. Please ask for an offer.
COPYING JIG FOR WOODWIND INSTRUMENTS
This jig is used for copying patterns of tone holes from an instrument or a drilled metal tube as template. Adjustable in length
- for instrument parts from 150mm to 380mm. Adjustable in two axes - movement in the longitudinal axis (x) by hand or
through gear-rack-drive (a toothed wheel), movement in the lateral axis (y) by turning the set screw . The movement of the
lateral axis is controlled by a dial. A lever locks the jig firmly in any position. The instrument parts are held in a 3-jaw-chuck
at the one end, the other end is held in a live centre.
The master-tube is clamped in the lower spindle , the new instrument is clamped in the upper spindle.The spindles move
synchronously.By positioning the locating pin you copy from the master-tube. The copying jig is to be mounted on the table
of a drilling machine.
551CZ
-551CZ- copying jig for clarinets, oboes and recorders, for instrument parts from
150mm to 380mm; double spindle, scale ring 360°, 3-jaw-chuck, gear-rack-drive (toothed wheel), spring-
mounted locating pin, dial; supplied with 1 metal tube for making a template.
Copying jig for longer instrument parts on request.
Price only on request. Please ask for an offer.
- 2 - ( 3.0. tools for woodwind instruments 12/13)