NEW TOOLS FOR BRASS AND WOODWIND INSTRUMENTS 21.03 ...

E-Mail: boehmtools@t-online.de web: www.boehmtools.de
We are exhibiting at Frankfurt Music Fair.
21.03.-24.03.2012
hall 1.1.–booth J46
NEW TOOLS FOR BRASS AND WOODWIND INSTRUMENTS
NEW
HOLDER (THREADED) FOR FRENCH HORN CORPUS
This new holder keeps the corpus/body of French horns firmly and safely in place during repair, assembly, polishing etc. Just
screw the bell off and screw the corpus onto the holder. It can be turned radially and is locked in position by a lever. The
square base of the holder is clamped in a vise or our special holding vise no. 170.
It is advisable to secure the corpus with a string.
-322- holder for French horn corpus, with 1 pc interchangeable threaded adapter,
standard size for bell screw threading Alexander horns.
Threaded adapters for Yamaha,
Paxman etc. on request
DENT TOOL FOR PICCOLO TRUMPET RIM
Piccolo trumpets from Schilke/Yamaha are smaller than German piccolos.
The rim is very flat. For these piccolos we made this new tool.
-131P-SY- bell iron for piccolo trumpet,flat (esp. Schilke/Yamaha)
INSPECTION LAMP (FOR FLUTE-SAXOPHONE)
Mostly used for alto-,tenor- and baritone- saxophone.
-578- leak light with fluorescent tube and bulb. For saxophones and flutes.
Complete with -220 V plug transformer, - 1 fluorescent tube, -1 bulb, -2
cords (bulb and tube can be used at the same time)
NEW
-578/4- LED-unit 170mm long, flexible, long cable.
You already have leak light no.578?
The new LED-unit makes it
even more useful.
A very good leak light
for baritone!
322
- 1- (new tools wood and brass 2012)-
578
578/4
131P-SY

HOLLOW PUNCHES
New set for punching and making discs from
cardboard,felt, plastic, leather and similar material.
The difference between each size is 0,5mm.
Comes with plate, holder and brass guide for
straight punching!
-641/3,5-12- hollow punches, set of 18 pc.,
dia 3,5 – 12mm, steps of 0,5mm,
with brass guide for
straight punching
Use a soft pad (wood, leather,soft plastic) as surface.
SPECIAL PLIERS FOR FLUTE CUPS
Jaws are parallel at opening of 4mm
-655- special pliers for
flute cups
E-Mail: boehmtools@t-online.de web: www.boehmtools.de
655
DISCS FOR SAX TONE HOLES AND KEYS
For planing the tone holes and the keys (without pads) of saxophones
you can use these hardened and grinded steel discs.
You work with a hammer on the discs.
-693- discs for sax tone holes and keys,
Set of 7 pieces dia 19mm to 59mm.
Hardened and grinded.
693
DENT ROLLER WITH FLAT HEAD
This dent roller has a radius and sharp edge. So you can
roll close to soldered on parts(for example braces and
finger hooks)and take dents out there. The tools consist
of a holder and inserts with different sizes.
The inserts are hardened and easily exchangeable.
-076/1- dent roller with 2 pc hardened inserts,
for dia 26 and dia.35mm
-076/2- dent roller with 4 pc. hardened inserts,
For dia 26, 35,45 and 70mm
- 2- (new tools wood and brass 2012)-
641/3,5-12
076/2