Grand Touring (GT) Specific Car Regulations 2013 ... - Grand Am

More documents

Recommendations

Info

Grand Touring (GT) Specific Car Regulations 2013 Mercedes SLS (Prep 2) Specifications - TBD. Weight: Tire size: Approved Modifications: Nissan 370 Z (Prep 1 and 2) (Final year of eligibility for 350Z) Weight: Minimum weight prep 1: 2600 lbs. Tire size: 305/650R18 front 325/680R18 rear. 3.5 Liter VQ35DE,13:1 compression,RRZ31-Spec 2 heads, 515/264 In, 485/250 Ex. Camshaft, 38 lb crank piston /rod 902 gms. Approved Modifications: 10
Grand Touring (GT) Specific Car Regulations 2013 Porsche GT3 Cup, 2010 (GRAND-AM) (Prep 1) 3.8L Engine eligible. Engine must be unmodified and sealed by PMNA Weight: Minimum weight 2600 lbs. Maximum RPM TBD 4.0L Engine approved. Engine must be unmodified and sealed by PMNA Weight: Minimum weight 2600 lbs. Must run 63.5mm restrictor as supplied by GRAND-AM Maximum RPM TBD Tire size: 285/645R18 front 325/710R18 rear. OEM fuel cell location required. Max fuel capacity 17.5 gal ABS not permitted. All cars must use the upgraded rear deck lid wing supports as supplied by PMNA. Must use OEM roof panel, engine location, and suspension pick up points. Front dive planes are not permitted. Maximum rear body width 75 inches. Car must have 2.5 inches minimum ground clearance. Approved Modifications: Allowed #996 352 425 9A and #996 352 426 9A rear calipers Rear fascia vents may be open. Allowed production Porsche GT3 Front brake caliper Lower Rear inner fender wheel house may be modified for suspension travel clearance Permitted 997-331-041-9C Rear Control arm, 997-331-047-9E “dogbone” top front & 997-331-047-9F “dogbone” top rear. Permitted wing support modification as outlined in Porsche Rear Deck Lid and Wing Support Mounting Bulletin Porsche GT3 Cup 2011-2013 (Prep 1) 3.8L Engine eligible. Engine must be unmodified and sealed by PMNA Weight: Minimum weight 2600 lbs. 4.0L Engine approved. Engine must be unmodified and sealed by PMNA Weight: Minimum weight 2600 lb. Must run 63.5mm restrictor as supplied Maximum RPM TBD Tire size: 285/645R18 front 325/710R18 rear. Must run 2009 splitter. OEM fuel cell location required. Max fuel capacity 17.5 gal ABS not permitted. All cars must use the upgraded rear deck lid wing supports as supplied by PMNA. Must use OEM roof panel, engine location, and suspension pick up points. Must run entirety of 2011 and newer body Front dive planes are not permitted. Maximum rear body width is 75 inches. Car must have 2.5 inches minimum ground clearance. Approved Modifications: Allowed #996 352 425 9A and #996 352 426 9A rear calipers Allowed production Porsche GT3 Front brake caliper Rear fascia vents may be open. Rear inner fender wheel house may be modified for suspension travel clearance. Permitted 997-331-041-9C Rear Control arm, 997-331-047-9E “dogbone” top front & 997-331-047-9F “dogbone” top rear Permitted wing support modification as outlined in Porsche Rear Deck Lid and Wing Support Mounting Bulletin 11
Page 1 and 2: Grand Touring (GT) Specific Car Reg
Page 9: Grand Touring (GT) Specific Car Reg

Grand Touring (GT) Specific Car Regulations 2013 ... - Grand Am

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?