TD SIGNIA Precoat
TD SIGNIA Precoat
TD SIGNIA Precoat
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>SIGNIA</strong> ® <strong>Precoat</strong><br />
Revised: 13 February 2013<br />
Solvent-free colour enhancer for <strong>SIGNIA</strong> ® surfaces<br />
Properties<br />
<strong>SIGNIA</strong> ® <strong>Precoat</strong> is a solvent-free, low-odour odour colour enhancer specially adapted for use with<br />
<strong>SIGNIA</strong> ® Urban Floor and <strong>SIGNIA</strong> ® Color 4ALL.<br />
• Solvent-free<br />
• Colour-enhancing effect<br />
• Low-odour<br />
Use<br />
<strong>SIGNIA</strong> ® <strong>Precoat</strong> is used as a colour enhancer in conjunction with <strong>SIGNIA</strong> ® Urban Floor and<br />
<strong>SIGNIA</strong> ® Color 4ALL.<br />
Areas of use<br />
• Absorbent mineral substrates<br />
• Colour enhancer in the system<br />
Technical details<br />
Packaging<br />
PE canister<br />
Pack size<br />
5 l<br />
Working temperature +5 °C to +35 °C<br />
Storage<br />
In frost-free conditions, 12 months<br />
Consumption<br />
Per coat<br />
Approx. 0.1 kg/m²<br />
1) At +20 °C and 65 % relative humidity.<br />
Substrate preparation<br />
The substrate must be clean and free of contamination and loose particles.<br />
Application<br />
Application is carried out using a brush, roller, mop or spray applicator. Once the coating has dried<br />
completely, the treated surfaces can be sealed with <strong>SIGNIA</strong> ® Finish Matt, <strong>SIGNIA</strong> ® Finish Gloss<br />
or <strong>SIGNIA</strong> ® Finish Silk Gloss.<br />
www.signia-artfloors.de<br />
<strong>SIGNIA</strong> ® <strong>Precoat</strong><br />
-1-
hahne system products<br />
<strong>SIGNIA</strong> ® Color 4ALL<br />
<strong>SIGNIA</strong> ® Urban Floor<br />
<strong>SIGNIA</strong> ® Finish Silk Gloss<br />
<strong>SIGNIA</strong> ® Finish Matt<br />
<strong>SIGNIA</strong> ® Finish Gloss<br />
Important information<br />
• Adjoining surfaces must only be treated with materials of the same batch number.<br />
• Maintain the correct working temperature.<br />
• The use of care products and regular cleaning of floors are recommended in order to<br />
maintain the surface quality of the coating.<br />
• Abrasive loads can cause scratching of the material's surface.<br />
Constituents<br />
Polymer dispersion, wetting agent<br />
Occupational safety/recommendation<br />
The usual hygiene and precautionary measures for handling chemicals should be observed. Wear<br />
suitable protective clothing.<br />
Disposal<br />
The local waste removal regulations must be observed.<br />
www.signia-artfloors.de<br />
<strong>SIGNIA</strong> ® <strong>Precoat</strong><br />
-2-