Model 609E-6
Model 609E-6
Model 609E-6
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Model</strong><strong>609E</strong>-6<br />
High-VoltagePower Amplifier<br />
Output voltage range<br />
0to ±4 kV<br />
Output current range<br />
0to ±20 mA<br />
The Trek<strong>Model</strong><strong>609E</strong>-6highvoltageDC-stablepower<br />
amplifier<br />
is designedtoprovideprecise<br />
controlofbi-polaroutput voltages<br />
intherangeof0to±4kV DCor<br />
peakACwithanoutput current<br />
capabilityof±20mADC or peak<br />
AC. The<strong>Model</strong><strong>609E</strong>-6canbe<br />
configuredasanoninverting<br />
amplifierwithafixedgainof<br />
1000V/V, or asaninvertingor<br />
differentialamplifier.<br />
Applicationsforthe<strong>Model</strong><br />
<strong>609E</strong>-6includeACandDC<br />
biasing ofelectrophotographic<br />
charging rollers,<br />
electrorheologicalfluidresearch,<br />
anddielectric material<br />
characterization. Features<br />
includeanall-solid-statedesign, a<br />
slew rategreaterthan150V/µs,<br />
asmallsignal-bandwidthof<br />
greater than 35kHz, andlow<br />
noiseoperation. Thefourquadrantactiveoutputstage<br />
sinks orsources currentinto<br />
reactive or resistiveloads<br />
throughouttheoutputvoltage<br />
range. This techniqueisessential<br />
for achieving theaccurateoutput<br />
responses andhighslewrates<br />
demandedbyreactiveloads.<br />
The <strong>Model</strong><strong>609E</strong>-6features a<br />
switch selectable currenttripor<br />
currentlimit modewithan<br />
adjustable0to20mAcurrent<br />
rangeusing theCurrentTrip/Limit<br />
Adjustpotentiometer on thefront<br />
panel. Whenthe<strong>Model</strong><strong>609E</strong>-6<br />
enters acurrenttripcondition,<br />
thehigh-voltageoutputis<br />
disabled,theTripStatusindicator<br />
willilluminateandtheTrip<br />
Monitor outputwillprovideaTTL<br />
low.<br />
The<strong>Model</strong><strong>609E</strong>-6is protected<br />
against over-voltageandovercurrentconditions<br />
thatmaybe<br />
generatedby activeloadsor by<br />
outputshortcircuits toground.<br />
Precision voltageandcurrent<br />
monitors providelow-voltage<br />
outputsignals formonitoring<br />
purposes orfor useasafeedback<br />
signalinclosed-loopcontrol<br />
systems. This makes the<strong>609E</strong>-6<br />
suitableforautomatedor<br />
computer controlledsystems.<br />
ADigitalEnablefeatureprovides<br />
aconnectionforaremotedevice<br />
to turnthehighvoltageonand<br />
off.<br />
The<strong>609E</strong>-6canalsobeoperated<br />
onabenchtopor,with optional<br />
hardware,inastandard19-inch<br />
rack.<br />
Precise control of<br />
bi-polar voltages<br />
Adjustable current limit<br />
or current trip<br />
Slew rate greater than<br />
150 V/ µ s<br />
Dynamic adjustment<br />
for optimizing<br />
AC response<br />
Remote high-voltage<br />
ON/OFF capability<br />
compliant<br />
CONTROL WITHOUT COMPROMISE
<strong>Model</strong><strong>609E</strong>-6<strong>Model</strong> Specifications<br />
10/40A Specifications<br />
All specifications are with no load unless otherwise noted.<br />
Output<br />
Output Voltage Range<br />
0to ±4 kV DC orpeak AC.<br />
Output Current Range<br />
0to ±20 mADC or peak AC.<br />
(See Automatic PowerLimit feature for<br />
limitations.)<br />
AmplifierInput<br />
Input Voltage Range<br />
0to±4 VDC or peak AC.<br />
Input Impedance<br />
Noninverting<br />
25 k Ω,nominal.<br />
Inverting<br />
50 k Ω,nominal.<br />
Differential<br />
50 k Ω,nominal.<br />
Features<br />
Amplifier Input<br />
Athree pin input connector that can be<br />
configuredfor inverting, noninverting,or<br />
differential amplification.<br />
Digital Enable<br />
Aninput providing aconnectionfor aTTL<br />
compatiblesignal to turn on and off the<br />
high-voltage output. ATTL high (or open)<br />
turns offthe high-voltage output. ATTL<br />
low turns on the high-voltage output.<br />
Response Adjust<br />
Agraduated one-turn potentiometer used<br />
tooptimize the AC response ofthe<br />
<strong>Model</strong> <strong>609E</strong>-6.<br />
Trip/Limit<br />
Aswitch selectseither aCurrent Trip<br />
mode or CurrentLimitmode. Agraduated<br />
one-turnpotentiometer is used to adjust<br />
the current trip/limitvalue from<br />
0to 20 mA.<br />
Out Of Regulation Indicator<br />
Anindicator will illuminate whenthe<br />
<strong>Model</strong> <strong>609E</strong>-6 fails to produce the<br />
required high-voltage output such as<br />
during currentlimit.<br />
Trip Status<br />
Anindicator will illuminate and theTrip<br />
Monitor BNC connector will provide a<br />
TTL low when the high-voltage output is<br />
disabled due to theoutput current<br />
exceeding the current triplevel.<br />
For more information about this orother<br />
products, contact TREK, INC.<br />
Features (cont.)<br />
Voltage Monitor<br />
Abufferedoutput provides alow-voltage<br />
replica of thehighvoltageoutput.<br />
Scale<br />
1/1000thofthe high-voltage output<br />
signal.<br />
DC Accuracy<br />
Betterthan 0.1% of full scale.<br />
AC Accuracy<br />
Calibrated using aRoss<strong>Model</strong> VD 30-<br />
4.1-BD-KC-ALU high-voltagedivider.<br />
Offset Voltage<br />
Less than ±2.5 mV.<br />
Output Noise<br />
Less than 2mVrms (measured using<br />
the true rms feature of the Hewlett<br />
Packard<strong>Model</strong> 34401Adigital<br />
multimeter).<br />
Output Impedance<br />
0.1 Ω.<br />
Performance(cont.)<br />
Slew Rate (10% to 90%, typical)<br />
Greater than 150 V/µs.<br />
Large Signal Bandwidth (1% distortion)<br />
DC to greater than 6kHz.<br />
Small Signal Bandwidth (-3dB)<br />
DC to greater than35 kHz.<br />
Settling Time (to 1%)<br />
Less than 150 µs for a0to 4kVstep.<br />
Stability<br />
Drift with Time<br />
Lessthan 100 ppm/hr, noncumulative.<br />
Drift with Temperature<br />
Lessthan 200 ppm/°C.<br />
Automatic Power Limit<br />
Automatically limits the internal power<br />
dissipationto protect the <strong>Model</strong> <strong>609E</strong>-6<br />
from overheating. The following graph<br />
illustratesthe automatic power limit<br />
output capability.<br />
Current Monitor<br />
Abufferedoutput provides alow-voltage<br />
representationof the load current.<br />
Scale<br />
0.5 V/mA.<br />
DC Accuracy<br />
Betterthan 0.5 %of full scale.<br />
Offset Voltage<br />
Less than ±5 mV.<br />
Output Noise<br />
AC Operating Range (frequenciesabove 50 Hz,<br />
50% duty cycle, and no DC offset)<br />
Less than 10 mVrms (measured using<br />
DC Operating Range<br />
the true rms feature of the Hewlett<br />
Packard<strong>Model</strong> 34401Adigital<br />
multimeter).<br />
General<br />
Bandwidth (-3db)<br />
DC to greater than10 kHz.<br />
Dimensions<br />
Output Impedance<br />
134 mm Hx432 mm Wx439 mm D<br />
47 Ω .<br />
(5.25″ Hx17″ Wx17.25″<br />
D).<br />
Weight<br />
Performance<br />
13.2 kg (29 lb).<br />
High-Voltage Output Connector<br />
DC Voltage Gain<br />
Alden high-voltage connector.<br />
Noninverting Configuration (V A)<br />
Amplifier Input<br />
1000 V/V.<br />
Amphenol panel mount.<br />
Inverting Configuration (V B)<br />
Voltage/Current Monitor Connectors<br />
-1000 V/V<br />
BNC coaxial connectors.<br />
Differential Configuration<br />
Digital Enable Connector<br />
Function of the difference between BNC coaxial connector<br />
twoinput signals. Represented by Trip/Limit Connector<br />
the equation:<br />
BNC coaxial connector.<br />
AC Line Receptacle<br />
V out =1000 (VA-V B)<br />
Standard IEC three-prong AC line<br />
connectorwith integral fuse holder.<br />
DC Voltage Gain Accuracy<br />
Power Requirements<br />
Betterthan 0.1% of full scale.<br />
Line Voltage<br />
Offset Voltage<br />
Factory set for one of two ranges:<br />
Less than ±1 V.<br />
90 to127 VAC or180 to250 VAC, at<br />
Output Noise<br />
48 to 63 Hz (specify when ordering).<br />
Less than80 mV rms(measuredusing the Power Consumption<br />
true rms featureof the Hewlett Packard 220 VA, maximum.<br />
<strong>Model</strong> 34401A digital multimeter).<br />
Detailedinformation concerning the<br />
output noise is available upon request.<br />
TREK, INC. 11601 Maple Ridge Road •Medina, NY 14103 •800-FOR TREK<br />
585-798-3140 •585-798-3106 (fax) •www.trekinc.com •sales@trekinc.com<br />
ISO 9001:2000<br />
FM 56910