2010 Product Catalog - HD Sheldon and Co.

High Volume Can Opening Solutions
CROWN PUNCH CAN OPENING SYSTEMS
MADE IN THE U.S.A.
The Model 895A and 895L Can Opening Systems wash, open, dump, rinse, crush and require just
one operator. The programmable logic controller ensures trouble-free service and performance.
Designed for food processors, commissaries, caterers and central school kitchens. The systems are
available with adjustable rails and conversion kits for quick change from one size can to another.
Constructed of 300 series stainless steel and designed for IP65 wash-down. The systems include
automatic drainage filter with regulators and coalescing filter and safety circuits with quick dump air
valves.
The new model 895L is designed specifically for operators opening high volumes of #10 cans. The
new linear de-lidding mechanism and dented can reject system ensures maximum speed and efficiency.
Features:
• NEW 895 offers a built in dented can reject
system, insuring maxium speed and
efficiency.
• Return on investment is achieved through a
reduction in labor for the same operation
• Can opening operation is accomplished more
quickly, meaning that employees can go on
to other jobs sooner
• Additional R.O.I. on system is recovered from
recycling of the crushed cans. Haulers will
usually not charge for the removal of a load
of crushed cans, because the cans now have
a value for their weight
• NEW P.L.C. operating system has on-screen
diagnostics to handle any necessary
troubleshooting
• More than 750 systems are in use around the
world by both large and small processors,
some with fewer than 50 employees
• Designed to meet NFPA79 electrical
standards
• Final set-up and training at the customer’s
location is included in the cost of the system *
• Technical advice and application support is
always available from Edlund
• The 895A and 895L open up to 25 cans per
minute or 1500 cans per hour. Some
processors will start using the system at a lower
volume to facilitate integration into a growing
operation
• Both models are backed by Edlund’s 84 years
of service
• CE and metric models now available
• Recently redesigned for easier cleaning and
sanitation
*Continental USA and Canada only. Call for costs
at other locations.
Call Factory
for quotations
Model
Number
895A
895L
Description
Air powered can opening systems for food processing, reprocessing and reclamation. The system will wash,
dry, open, discard lid, dump product, wash can interior and crush up to 1500 cans per hour with only one
operator. The 895A model is intended for use with multiple can sizes.
NEW 895L Model is designed to obtain maximum efficiency with high volumes of #10 (3.1 kg) size cans.
Note: Can opening systems are custom manufactured and require factory personnel to provide
installation , set-up and training.
NEW! HIGH CAPACITY WASHER CRUSHERS
MADE IN THE U.S.A.
Model
Number
Description
980WC-PP Specifically designed for prison operations or where
safety is of the utmost importance.
Built-in, lockable receptacle cabinet prevents
unauthorized access to crushed cans.
980WC Standard model without lockable receptacle cabinet.
Call Factory
for quotations
Features:
• Wash-down to IP65 standard
• Constructed of heavy duty 300 series stainless steel
• Made in the U.S.A
980WC-PP
26