Studio adaptor - Hitachi Kokusai Electric America, Ltd.

More documents

Recommendations

Info

STUDIO ADAPTER SA-1000 (Box type lens mount) CAMERA ATTACHMENT Move the lever to the Lock position and place the camera on the mount base. Move the lever to rock the mount base . Move each of the levers and to Adjust and fit of the camera in the bayonet the Unlock position. mount with holding the rear side of the camera, and then press down the lock lever. While pushing the slide release pin , Camera attachment completed slide the camera into the bayonet mount. Place the levers and in the Lock position to stop the vertical and horizontal movements of the camera, respectively. Connect the viewfinder to camera.
STUDIO ADAPTER SA-1000 (Box type lens mount) CAMERA REMOVAL Remove the view finder from the camera. Push the bayonet mount lever upward to unlock the camera. Pull the camera rearward to remove it from the bayonet mount. Pushing the release button . Move the lever to unlock the mount base. Camera removal completed Remove the camera from the mount base.
Page 1 and 2: Studio adaptor SA-1000 Operation ma
Page 3 and 4: Video switches for the View Finder
Page 5 and 6: SA CS-1/CS-2 display switch operati
Page 14 and 15: STUDIO ADAPTER SA-1000 (Box type le
Page 16 and 17: STUDIO ADAPTER SA-1000 (Box type le

Studio adaptor - Hitachi Kokusai Electric America, Ltd.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?