Installation Instructions - H&S Performance
Installation Instructions - H&S Performance
Installation Instructions - H&S Performance
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Included parts:<br />
1- Aluminum EGR Valve Plate with O-Ring<br />
1- Aluminum EGR Cooler Plate with O-Rings<br />
1- 180 Degree Stainless Steel Coolant Tube<br />
1- Stainless Steel Up Pipe<br />
1- Up pipe gasket<br />
1- 3/4” Silicone Hose<br />
2- 3/4” Hose Clamps<br />
2- 5/16 X 1.25” Bolts<br />
2- 5/16 X 2.5” Bolts<br />
4- 5/16 Nuts<br />
STEP 1<br />
Un-hook battery terminals, drain the engine coolant and remove clips from the plastic wire<br />
way just above the turbo, fold to windshield of truck.<br />
Plastic Wireway<br />
STEP 2<br />
Remove the radiator over flow reservoir by removing 3 hose clamps (the third hose clamp is<br />
on the bottom side of the reservoir), and 2 bolts.<br />
Clamps<br />
Bolts<br />
1-888-628-1730 • www.hsperformance.com 3