Process Control System
Process Control System
Process Control System
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Heating unit 170713<br />
1/1<br />
Design<br />
The heating unit is screwed into a 50 mm hole in the container by means of a hexagon<br />
head.<br />
Function<br />
The heating unit is operated using 230 V AC. The conducting connections are within the<br />
earther housing.<br />
The heating unit is switched on and off via a relay. The control voltage of the relay is<br />
24 V DC.<br />
Note<br />
Do not operate the heating unit unless the heating element is fully immersed in the fluid.<br />
Heating capacity<br />
<strong>Control</strong> voltage<br />
Dimensions<br />
Heating element<br />
Screw thread<br />
Materials (casing – heating element)<br />
Connection<br />
Heating unit<br />
<strong>Control</strong> connection<br />
Subject to change<br />
1000 W / 230 V AC<br />
24 V DC<br />
150 mm x Ø 20 mm<br />
G11/2“<br />
Stainless steel<br />
Mains cable with plug, 2000 mm long<br />
3-pin socket<br />
Technical data<br />
Festo Didactic
Change language