LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
LanTEK® II Series Manual - Ideal Industries Inc.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 2<br />
Product Description<br />
2.3.2. Battery Charging<br />
The batteries of the Display (DH) and Remote (RH) handset are charged using the adapter. It<br />
takes approximately 6-8 hours until the batteries in the instrument are fully charged. If the<br />
batteries are charged externally, charge time is approximately 4 hours.<br />
During recharging, the instrument is calibrated to the corresponding battery. This ensures an<br />
accurate indication of the charge state at all times.<br />
NOTE:<br />
Charge time depends on charge state of battery.<br />
When the battery is removed, the Display handset (DH) data and preferences are preserved<br />
in the flash ROM by a coin cell lithium battery.<br />
2.4. Talkset<br />
The LanTEK ® <strong>II</strong> Cable Certifier is designed for use with a talkset. This function allows<br />
communication between the Display (DH) and Remote (RH) handset through an externally<br />
attached microphone/headset. For this purpose, the Display (DH) and Remote (RH) handset<br />
must be connected to the test adapters through a cable.<br />
19
Change language