Clinch Fastening Systems
Clinch Fastening Systems
Clinch Fastening Systems
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Clinch</strong> Bolts: Type TCB<br />
Rivtex® <strong>Fastening</strong> <strong>Systems</strong><br />
displacement lobes<br />
displacement lobes<br />
locking/retaining groove<br />
squeeze/retaining ring<br />
Features<br />
• Displacement lobes<br />
• Locking/retaining groove<br />
• Squeeze/retaining ring<br />
• External threads<br />
• Available in sizes M5 – M10<br />
• Can be used in sheet metal 0.75mm – 2.5mm<br />
before installation<br />
Installation Sequence (Representative Sample)<br />
after installation<br />
Application material must be drilled<br />
or punched. Two-sided access is<br />
required during installation.<br />
Installation equipment applies pressure onto the head of the stud and the oppposite<br />
side of the application material. As pressure continues, the application material cold<br />
flows into the locking groove.<br />
8
Change language