Clinch Fastening Systems
Clinch Fastening Systems
Clinch Fastening Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Clinch</strong> Studs<br />
Strux® <strong>Fastening</strong> <strong>Systems</strong><br />
retaining groove<br />
lobular<br />
configuration<br />
retaining ring<br />
displacement<br />
lobes<br />
Features<br />
• Displacement lobes in TORX® configuration or<br />
others as required<br />
• Locking/retaining groove<br />
• Shear/retaining ring<br />
• External threads<br />
• Available in sizes M4 – M16 (#8 – 5/8)<br />
before installation<br />
after installation<br />
Installation Sequence (Representative Sample)<br />
Application material must be drilled or<br />
punched. Two-sided access is required<br />
during installation.<br />
Installation equipment applies pressure onto the head of the stud and the opposite<br />
side of the application material. As pressure continues, the application material cold<br />
flows into the locking groove.<br />
4
Change language