Particlecounter Modell GT-526 Manual - ccs-wildberg.de

4.5. Recalling Sample Data
Stored sample events can be viewed from the Operate Screen (as described in section 4.2.2), but
requires navigating one record at a time to reach a desired record. The Recall Data Screen provides a
way to quickly navigate to a record based on time. The Recall Data Screen is accessed by selecting
RECALL DATA from the main menu. If no sample events are available the screen shown in Figure 13
is displayed. To exit the No Samples Events Screen press the Start/Stop, ESC or Enter keys.
Figure 14 shows the Recall Data Screen when there are sample events available.
To recall data, enter the desired date/time string of the data to recall and select the START/STOP
button. The unit will recall the data from the date/time entered (if an exact match is found) or the next
most recent data available. The screen shown when the data is recalled is the Operate Screen. The
screen reacts in exactly the same manner as described above and it now has the desired data shown.
4.6. Printing Sample Data
Stored sample events can be printed through the printer port within a user selected range. The
following sections describe the process of printing sample data.
4.6.1. Selecting Data Range
To access the printing feature of the GT-526, select PRINT DATA from the menu. If no sample events
are available the screen shown in Figure 15 is displayed. To exit the No Samples Events Screen press
the Start/Stop, ESC or Enter keys.
GT-526 9800 Rev A
Seite | 17