06.02.2014 Views

TISSOCYL COD - Zschimmer & Schwarz

TISSOCYL COD - Zschimmer & Schwarz

TISSOCYL COD - Zschimmer & Schwarz

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

<strong>TISSOCYL</strong> <strong>COD</strong><br />

Ecological bleaching compound for cotton and mixtures<br />

Chemical composition<br />

combination of natural microparticles and fatty alcohol ethoxylates<br />

Characteristics<br />

Appearance:<br />

white, viscous liquid<br />

Ionicity:<br />

non-ionic / anionic<br />

Solubility/Emulsifiability: readily soluble in cold water<br />

pH-value original: around 6.0<br />

Resistance:<br />

resistant to acids and alkalis in usual concentrations as well as to<br />

hard water; compatible with anionic and non-ionic products<br />

Storage:<br />

at least 12 months if properly stored<br />

Stability to frost:<br />

not sensitive to frost;<br />

product solidifies at temperatures below 0°C but is applicable again<br />

after thawing and thorough stirring<br />

Application properties<br />

• ecological and sustainable bleaching compound<br />

• low <strong>COD</strong> and BOD values<br />

• well-balanced stabilizing of discontinuous hydrogen peroxide bleaching processes<br />

• very high degree of whiteness<br />

• very low foaming, suitable for jets and continuous systems with high liquor turbulences<br />

• oil adsorbing effects caused by natural microparticles<br />

• excellent emulsifying of mineral and silicone oils<br />

• acts as crease inhibitor, offers a smooth and soft touch of goods<br />

• dosable, not gelling, thixotropic<br />

• low risk of getting precipitation when applied in autoclaves<br />

• cleaning effects in pre-treatment units<br />

• water hazard class 1 (German regulation)<br />

Application fields<br />

<strong>TISSOCYL</strong> <strong>COD</strong> is a highly efficient compound for the discontinuous hydrogen peroxide bleaching of<br />

cotton and mixtures. An optimal degree of whiteness is reached because the bleaching process is<br />

mild and balanced well.<br />

The ecological bleaching compound offers a good penetration of cotton and displays an excellent<br />

dispersing and emulsifying behavior of native impurities, paraffins, waxes and oils as well.<br />

The above results have been obtained from trials in our laboratory and plant. In the light<br />

of changing conditions they can only serve as a guide and are therefore offered without<br />

obligation. We ask you to observe the possible rights of third parties.<br />

Stand:<br />

11. March 2013<br />

Page:<br />

1 / 2


<strong>TISSOCYL</strong> <strong>COD</strong><br />

<strong>TISSOCYL</strong> <strong>COD</strong> is suitable as an ecological detergent for synthetic fibers and their mixtures with<br />

elastane too. The use of special microparticles results in an excellent emulsifying of mineral and<br />

silicone oils.<br />

<strong>TISSOCYL</strong> <strong>COD</strong> reliably prevents silicone and oil separations on the machinery as well as<br />

partial reattachment of detached silicones on the goods.<br />

<strong>TISSOCYL</strong> <strong>COD</strong> can be used in machines with high liquor turbulences such as jet dyeing<br />

machines, sieve drum washing machines etc. without problems.<br />

The low <strong>COD</strong> value of <strong>TISSOCYL</strong> <strong>COD</strong> reduces the waste water load.<br />

Guidelines for application<br />

<strong>TISSOCYL</strong> <strong>COD</strong> is readily soluble in cold water.<br />

We recommend to clean the machine before the first use with 3 - 5 g/l <strong>TISSOCYL</strong> <strong>COD</strong> at<br />

70 - 80°C because <strong>TISSOCYL</strong> <strong>COD</strong> is able to remove oily impurities from the units.<br />

Suggested quantities to be applied:<br />

Bleaching of cotton:<br />

3.0 - 5.0 g/l <strong>TISSOCYL</strong> <strong>COD</strong><br />

8.0 - 10.0 ml/l H2O2 35%<br />

2.5 - 3.5 ml/l NaOH 50%<br />

Bleaching conditions depending on the degree of whiteness:<br />

30 - 60 min at 95°C or 10 -20 min 115°C.<br />

- half-white RFD: hot rinsing, removal of residual peroxide with REDUZOL RED, dyeing<br />

- full-white: including optical brightener, hot and cold rinsing/neutralization, softening<br />

The above results have been obtained from trials in our laboratory and plant. In the light<br />

of changing conditions they can only serve as a guide and are therefore offered without<br />

obligation. We ask you to observe the possible rights of third parties.<br />

Stand:<br />

11. March 2013<br />

Page:<br />

2 / 2

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!