V-SEAL Pipe Flashings For slate and tiled roofs - Brands of Watford

16 Pipe Flashing Systems – for slate and tiled roofs
Providing solutions by design – VA Series
Base
Base
The large rectangular aluminium base is malleable and simply
formed to match the profile of roof slates and tiles. The large size of
base also offers excellent coverage and provides ample working
material for dressing over the tiles around the penetration. A soft
grade of aluminium has been carefully selected to ensure optimum
workability and ease of installation.
Cone
Cone
Each rubber cone suits a wide range of pipe sizes and roof pitches.
The pipe diameters are marked on the ribbed measurement lines,
providing easy identification of size ranges and helping to guide an even cut around the cone. The flexibility of
the cone allows the pipe flashing to be installed on roofs of varying pitches and also accommodates expansion,
contraction and building movement, whilst maintaining a weatherproof seal.
Materials
VA Series aluminium base pipe flashings are available
with cones in EPDM (for cold pipes) and silicone (for
high temperature pipes). These materials are of the
highest quality and are resistant to ozone and ultra
violet light. The manufacturers state that the flashings
have a 20 year product replacement warranty against
faulty manufacture or materials.
Ethylene Propylene Diene Monomer
(EPDM) Rubber:
Temperature range –40°C to +115°C.
Silicone Rubber:
Temperature range –60°C to +240°C.
Aluminium Base:
Grade B1200-0, 1mm thick.
To order VA Series:
Our product codes have been formulated to make selecting the correct pipe flashing as simple as possible by
providing the information required in a concise manner, showing type, cone material, colour and pipe diameters.
Example Code: VA EB 45-90
VA Series EPDM Black Pipe Diameters 45-90mm
Use the information provided ensuring the pipe diameter of the penetration you need to seal falls comfortably within
the dimensions shown (see the Pipe Flashings Product Selector Guide – for slate and tiled roofs on page 19 for
further assistance).
Select either EPDM (cold pipes) or silicone (hot pipes) and use the relevant product code.
VA Series 5mm-50mm
Product Material Colour Temperature Pipe Diameters (mm) Base Pack
Code Resistance 0-25° Pitch 0-45° Pitch Dimensions (mm) Quantity
VA SB 5-50 Silicone Black –60°C to +240°C 5-50 5-40 450 x 600 5
Y This product is especially suited for solar applications and its unique features are highlighted on pages 20-21
VA Series 5mm-50mm DUO – 2 x cones on aluminium base
Product Material Colour Temperature Pipe Diameters (mm) Base Pack
Code Resistance 0-25° Pitch 0-45° Pitch Dimensions (mm) Quantity
VA SB 5-50 Silicone Black –60°C to +240°C 5-50 5-40 450 x 600 5
DUO
Y This product is especially suited for solar applications and its unique features are highlighted on pages 20-21