V-SEAL Pipe Flashings For slate and tiled roofs - Brands of Watford
V-SEAL Pipe Flashings For slate and tiled roofs - Brands of Watford
V-SEAL Pipe Flashings For slate and tiled roofs - Brands of Watford
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
26 <strong>Pipe</strong> Flashing Systems – for flat <strong>ro<strong>of</strong>s</strong><br />
Providing solutions by design – MR Series<br />
Sleeve<br />
Base<br />
MR Series pipe flashings are particularly for use with ro<strong>of</strong>ing<br />
membranes <strong>and</strong> are available in three different materials.<br />
EPDM – for use with built up felt <strong>and</strong> mastic asphalt ro<strong>of</strong> finishes.<br />
PVC – for use with PVC single ply membranes.<br />
PP – for use with TPO single ply membranes.<br />
Base<br />
The circular base provides a large surface area to ensure the best<br />
possible adhesion <strong>of</strong> the ro<strong>of</strong> system to the pipe flashing.<br />
Sleeve<br />
Each flashing suits more than one pipe diameter <strong>and</strong> is simply cut to the required size as needed. The stepped<br />
configuration ensures good surface contact with the pipe <strong>and</strong> each flashing is supplied with a stainless steel<br />
screw clamp to provide a tight seal. The flexibility <strong>of</strong> the sleeve allows for expansion, contraction <strong>and</strong> building<br />
movement whilst maintaining a weatherpro<strong>of</strong> seal.<br />
Materials<br />
Ethylene Propylene Diene Monomer<br />
(EPDM) Rubber:<br />
Temperature range –40°C to +120°C.<br />
Polyvinyl Chloride (PVC):<br />
Temperature range –25°C to +90°C.<br />
Polyolefin Polypropylene (PP):<br />
Temperature range –40°C to +120°C.<br />
The manufacturer gives a 10 year warranty for the<br />
materials.<br />
To order MR Series:<br />
Our product codes have been formulated to make selecting the correct pipe flashing as simple as possible by<br />
providing the information required in a concise manner, showing type, material, colour <strong>and</strong> pipe diameters.<br />
Example Code: MR EB 34-90<br />
MR Series EPDM Black <strong>Pipe</strong> Diameters 34-90mm<br />
Use the information provided ensuring the pipe diameter <strong>of</strong> the penetration you need to seal corresponds with the<br />
dimensions shown.<br />
MR Series 20mm<br />
MR Series 34mm-90mm<br />
Product Material Colour Temperature <strong>Pipe</strong> Diameters Base Pack<br />
Code Resistance (mm) Diameter (mm) Quantity<br />
MR EB 20 EPDM Black –40°C to +120°C 20 155 25<br />
MR PG 20 PVC Grey –25°C to +90°C 20 155 25<br />
MR TG 20 PP Grey –40°C to +120°C 20 155 25<br />
Product Material Colour Temperature <strong>Pipe</strong> Diameters Base Pack<br />
Code Resistance (mm) Diameter (mm) Quantity<br />
MR EB 34-90 EPDM Black –40°C to +120°C 34, 50, 60, 75, 80, 90 340 25<br />
MR PG 34-90 PVC Grey –25°C to +90°C 34, 50, 60, 75, 80, 90 340 25<br />
MR TG 34-90 PP Grey –40°C to +120°C 34, 50, 60, 75, 80, 90 340 25
Change language