The complete line from Marposs for checks on machine tools

MEASURING PROBES: T18 - T25 - T36 - T60
<strong>The</strong> Mida <strong>line</strong> offers a wide range of touch probes with
various sizes and overtravels to meet any measuring and
checking requirements.
<strong>The</strong> probes are available in two versions: "S" (Shielded)
<strong>for</strong> applications requiring exceptional resistance to chips
and shavings, and "G" (double Gasket) <strong>for</strong> applications
which call <strong>for</strong> absolute resistance to coolants.
Mida probes fall into two further categories:
• Probes <strong>for</strong> part inspection
• Probes <strong>for</strong> tool settings
ALL
APPLICATIONS
CONTACTLESS TOOL CHECK SYSTEMS: Mida Laser
<strong>The</strong> Mida Laser contactless measuring system allows
very rapid <strong>checks</strong> and measurements to be per<strong>for</strong>med
on tools, minimising machine down times and allowing
production times to be optimised.
Unlike touch probes, Mida Laser probes allow complex
measurements on moving tools (high speed) without
making any contact. This guarantees a significant
reduction in the time required <strong>for</strong> operations.
<strong>The</strong> system is based on a high precision laser beam and
photodiode. <strong>The</strong> signals generated by the system, after
the Laser beam is interrupted, are used by the machine
CNC to per<strong>for</strong>m the necessary measuring operations.
<strong>The</strong> system is available in two versions:
• Modular: the emitter and receiver are separate so that
they can be mounted in any area of the machine
• Stand alone: the emitter and receiver are mounted
on a dedicated support.
MACHINING
CENTRES
MILLING
MACHINES
GLASS/MARBLE
WORKING MACH.
2 MIDA Line