Process Follows IT?
Process Follows IT?
Process Follows IT?
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Target Driven Design<br />
Lehrstuhl für Virtuelle Produktentwicklung<br />
Principle of Target Driven Design<br />
User<br />
initializes<br />
Model<br />
extracts<br />
Properties<br />
Constraints<br />
changes<br />
alteration<br />
parameters<br />
System<br />
calculates<br />
compares<br />
+<br />
–<br />
User sets<br />
Targets<br />
• Target properties are used to control the design workflow of the e product.<br />
• An optimization loop refines the initial model - within predefined initial constraints<br />
until it is as close as possible to the desired target properties.<br />
• Possibility for the user to control and to interact.<br />
(Source: FIORES)<br />
<strong>Process</strong> <strong>Follows</strong> <strong>IT</strong>? Prof. Dr.-Ing. Martin Eigner Folie: 39<br />
Example for Target Driven Design (1)<br />
Lehrstuhl für Virtuelle Produktentwicklung<br />
Working procedure:<br />
Shape modification by defining/specifying target reflection lines.<br />
CAD model with visualised<br />
surface properties, here<br />
simulated reflection lines<br />
("highlights") on a CAD<br />
surface.<br />
The system has to modify<br />
the surface of the model so<br />
that line A runs parallel<br />
to line C (target(<br />
is line B).<br />
Procedure:<br />
• Select not-satisfying line A<br />
• Define new target line B<br />
(parallel to line C)<br />
• CAD system caculates the new<br />
corresponding surface<br />
(Source: FIORES)<br />
Prof. Dr.-Ing. Martin Eigner Slide: 40<br />
20