SNS Accessories - Primex Wireless

product data sheet
Accessories
Synchronous network system
Wire Guards
Protect your system clocks against accidental damage or
vandalism with the wire guard accessory.
Wire Guards
Part No.
Description
14131 Analog Wire Guard, for 12.5” (31.75cm) clocks
(14” [35.56cm] square)
14123 Analog Wire Guard, for 16” (40.64cm) clocks
(18” [45.72cm] square)
Analog Wire Guard
14388 Digital Wire Guard, 2.5” (6.35cm), 4- or 6-digit
14389 Digital Wire Guard, 4” (10.16cm), 4- or 6-digit
Digital Wire Guard
Polycarbonate Guards
This durable, high-impact guard is nearly indestructible, while
providing a clear viewing area. A water-resistant gasket,
makes it perfect for indoor pools and high humidity areas.
Polycarbonate Guards
Part No.
Description
14453 Digital Clock Polycarb Guard, 2.5” (6.35cm), 4- or 6-digit
14455 Digital Clock Polycarb Guard, 4” (10.16cm), 4- or 6-digit
* Add a “-1” after item number for the water resistant gasket
(Example: 14453-1)
Clear Polycarbonate Digital Clock Guard
Alkaline Batteries
These Duracell Procell alkaline batteries are the ideal battery solution for use
with Primex Wireless analog clocks. The alkaline batteries provide optimal
performance and a battery life of up to 4 years.
D-Cell
Alkaline Battery
Alkaline Batteries
Part No.
SNS884
Description
(4) D-Cell Alkaline Batteries
PoE Midspan Injector & Power Supply
Supplies 48VDC over your existing Ethernet infrastructure to power SNS PoE
Clocks and Timers. May also be used to complete configuration of PoE
clocks prior to installation. The injector eliminates the need for external AC/
DC power cabling.
PoE Injector
Part No.
Description
14303 PoE Midspan Injector & Power Supply
Server Mounting Rails
PoE Injector
Power Supply
Server Mounting Rails
Part No.
Description
14297 24” (60.96cm) Rails with ball-bearing slides

product data sheet
Accessories
Synchronous network system
Accessories Specifications:
Wire Guard Specifications:
• Constructed of steel with a zinc-plated finish
• Mounting screws included
• Analog Wire Guards
- 12.5” Clocks (31.75cm): 14” square x 3”D (35.56cm square x
7.6cmD)
- 16” Clocks (40.64cm): 18” square x 3”D (45.72cm square x
7.6cmD)
• Digital Wire Guards
2.5” (6.35cm) Guard
- Overall: 16.0”L x 7.0”H x 5.5”D (40.64cmL x 17.78cmH x
13.97cmD)
- Center hole openings: 2.75”L x 2.75”W (6.99cmL x 6.99cmW)
- Edge hole openings: 2.75”L x 1.5”H x 4.25”D (6.99cmL x
3.81cmH x 10.8cmD)
4” (10.16cm) Guard
- Overall: 25.0”L x 9.8”H x 4.4”D (63.5cmL x 24.9cmH x 11.2cmD)
- Center hole openings: 2.75”L x 2.75”W (6.99cmL x 6.99cmW)
- Edge hole openings: 2.75”L x 1.5”H x 5.25”D (6.99cmL x
3.81cmH x 13.34cmD)
Clear Polycarbonate Digital Clock Guard Specifications:
• Constructed of a high impact polycarbonate
• Water resistant gasket available
• 2.5” (6.35cm) Guard: 14.75”L x 10.25”H x 5.25”D
(37.48cmL x 26.04cmH x 13.34cmD)
• 4” (10.16cm) Guard: 24.5”L x 13.5”H x 8”D
(62.23cmL x 34.29cmH x 20.32cmD)
D-Cell Alkaline Battery Specifications:
• Nominal Voltage = 1.5 V
• Operating Voltage = 1.6 - 0.75V
• Impedance: 136 m-ohm @ 1kHz
• Typical Weight: 4.9 oz. (139gm)
• Typical Volume: 3.4 in. 3 (56.4 cm 3 )
• Terminals: Flat
• Storage Temperature Range: -4ºF to 95ºF (-20ºC to 35ºC)
• Operating Temperature Range: -4ºF to 130ºF (-20ºC to 54ºC)
• ANSI: 13A
• IEC: LR20
PoE Midspan Injector & Power Supply:
• PoE IEEE 802.3af compliant
• Certification: FCC/IC/CE marked
• Power: 48vdc, 19W output
L
Digital Wire Guards
D
H
W
H
H
Analog Wire Guards
D
L
Polycarbonate Guard
D
To Learn More:
Call 800.537.0464 (U.S.)
800.330.1459 (Canada)
Email: info@primexwireless.com
primexwireless.com
©2011 Primex Wireless, Inc. The Primex logo is a registered trademark of Primex Wireless, Inc.
XR is a trademark of Primex Wireless, Inc. All other trademarks are the property of their respective owners.
All Rights Reserved.
2011.053 8.12