Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Specialist<br />
Sockets & Wrenches<br />
Ford Diesel Injector Set<br />
<strong>AST</strong>4888<br />
Ford 2.0/2.2/2.4 Duratorq Diesel Injector - Removal / Installation<br />
and Compression Test Adaptor Set.<br />
Injector Socket & Retaining Clamp<br />
These Ford Injectors MUST BE held in correct<br />
orientation when being installed, to AVOID seat<br />
damage, and for alignment to fuel lines.<br />
Compression Test Adaptor<br />
Dummy Injector Adaptor<br />
for use with <strong>AST</strong> Diesel Engine<br />
Compression Test Kits.<br />
<strong>AST</strong>4894 <strong>AST</strong>4893 <strong>AST</strong>4666-6<br />
VAG Specialist Socket Set<br />
A MUST for all VAG Repair Shops<br />
VAG STEERING & SUSPENSION APPLICATIONS<br />
Specialist Socket Set of LARGER XZN / (Spline) sizes for bolts found across<br />
the VAG model range in suspension struts, brake callipers and wheel<br />
bearing areas etc.<br />
<strong>AST</strong>4932<br />
Specialist Sockets<br />
l Contains 6 x Sockets (3x75mm and 3x40mm lengths)<br />
l Sizes: M14, M16 & M18 (Spline) - 1/2” Drive<br />
l All IMPACT QUALITY<br />
l Supplied in Storage Case<br />
VAG Hub Bolt Socket - M18 - ¾” DRIVE<br />
Models:<br />
Audi: A3<br />
Seat: Altea, Leon, Toledo<br />
VW: Golf, Golf Plus, Jetta, Touran, Eos, Passat<br />
<strong>AST</strong>4918<br />
l IMPACT QUALITY, One Piece, M18 XZN/Spline Hub Bolt Socket<br />
used to remove and install HIGH TORQUE hub bolts on VAG models.<br />
l ¾” Drive essential to accommodate torque loadings as high as<br />
200Nm. + 180 degrees.<br />
l 100mm Long<br />
asttools.co.uk - <strong>Helpline</strong> <strong>+44</strong> (0)<strong>1527</strong> <strong>528848</strong><br />
www.asttools.co.uk - ( <strong>Helpline</strong> <strong>+44</strong> (0)<strong>1527</strong> <strong>528848</strong><br />
87
Change language