John Deere - Vintage Snow
John Deere - Vintage Snow
John Deere - Vintage Snow
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Service 23<br />
SKIS<br />
c<br />
Replacing Ski Wear Rods<br />
Wear rods should be replaced when they are worn to<br />
one-half their original size.<br />
1. Remove lock nuts securing wear rod to ski.<br />
2. Pry rod down to free studs from holes.<br />
3. Slide rod forward to remove rod from rear hole.<br />
4. Install new rod in opposite sequence.<br />
c<br />
M3057?<br />
M30577<br />
Replacing Ski Wear Plates<br />
Replace wear plates when excessively worn.<br />
1 . Raise front of snowmobile.<br />
2. Remove cotter pin (A), nut (B) and bolt (C).<br />
3. Lift spring and remove wear plate (D).<br />
4. Install new wear plate.<br />
5. Lower spring and install bolt, nut, and cotter pin.<br />
A-Cotter Pin B- Nut C- Bolt<br />
M30883<br />
D-Wear Plate