John Deere - Vintage Snow

28 Service
TIGHTENING HARDWARE AND COMPONENTS
)
)
M33154
Check hardware and components for tightness, wear
and damage on a yearly basis. Replace any parts that.
are questionable.
A
CAUTION: Worn, bent or damaged ski and
steering components are unsafe.
1. Wear rod nuts.
2. Ski bolts.
3. Steering arm bolts.
4. Tie rod end bolts.
5. Secondary shaft bearing cap screws.
6. Driven sheave cap screw.
7. Muffler springs.
8. Throttle and choke cables.
9. Intake manifold nuts.
10. Carburetor attachment.
11 . Engine mounting bolts.
12. Drive sheave cap screw.
13. Suspension cap screws.
14. Shock absorber screws.
Adjusting Glove Box Door Latch
1. Open glove box door.
2. Loosen screws and move latch forward or rearward.
3. Tighten screws.
M28321