Idaho National Laboratory Environmental Monitoring Plan
Idaho National Laboratory Environmental Monitoring Plan
Idaho National Laboratory Environmental Monitoring Plan
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
The Operational Dosimetry Section of the ICP contractor analyzes the environmental dosimeters. The<br />
four chips are read separately and a mean response is determined for each set. This value is converted to<br />
the exposure in milliroentgen based on a detailed calibration procedure. Dosimeter data are interpreted by<br />
comparing exposures measured at the boundary locations to those at distant locations.<br />
The ESER Program also maintains two HPIC to monitor exposure rates in “real time” at the Rexburg<br />
and Blackfoot Community <strong>Monitoring</strong> Stations. Data collected at these locations are transmitted to the<br />
NOAA office in <strong>Idaho</strong> Falls via a radio telemetry network. The data are displayed on NOAA’s Mesonet<br />
web site at http://www.noaa.inel.gov/windV/windV.asp.<br />
4.9.4 NOAA<br />
The NOAA ARLFRD is primarily responsible for meteorological monitoring at the INL Site (see<br />
Section 5). However, external radiation sensors have been installed at all towers in the meteorological<br />
monitoring network; most of the sensors are for event monitoring and are described in Section 6. All<br />
external radiation sensors used for environmental surveillance are owned and maintained by other<br />
organizations. ARLFRD’s primary role with these sensors is to collect and archive the data. Sixteen<br />
towers have HPIC, two owned by the ESER Program and the others owned by the State of <strong>Idaho</strong>.<br />
<strong>Environmental</strong> Surveillance 4-42