JAMIA HAMDARD HAMDARD NAGAR NEW DELHI-62

GENERAL SPECIFICATION
All work shall be executed strictly in accordance with the specifications given in schedule of quantities and/or with
the following specifications. For such items, which are not covered or clarified by these specifications, latest edition
of C.P.W.D. specification shall apply. The work shall be carried out as per drawing and instruction of Engineer In
charge.
1 The work shall be carried out simultaneously with the electrical and other services and in co-operation with the
contractor for the above services. The work shall be carried on till it is completed satisfactorily along with the
completion of essential portions of other services. The building contractor still keep the other contractors
informed well in advance of the proposed program of the work and shall give adequate notice to enable them to
carryout their part of the work so that the building work is not hindered. The contractor shall further cooperate
with the contractors, in respect of any facilities required by the e.g. making holes in shuttering for sanitary pipe's
electric conduits, fan hooks etc. however nothing extra shall be admissible to him for such reasonable
assistance and facilities afforded to other contractors, and the building contractor shall be deemed to have
taken these factors into consideration while quoting his rates.
2. The work shall be executed as per specification entered in tender document and instruction of engineer incharge.
Contractor is presumed to have studied the tender document & its specification, nothing extra will be
paid for any item on account or its shape, size, location or other difficult circumstances even if the schedule
makes no distinction, as long as entered in the tender.
3. All work shall be inclusive of centering and shuttering unless specified otherwise.
4. All materials and workmanship shall be of the respective kinds described in the contract and in accordance
with the satisfaction of engineer in-charge on the site or at all or any of such places. The Contractor shall
provide such assistance as instruments, machines, labour and materials, as are normally required for
examining, measuring, and testing any work and the quality weight or quantity of any material used and shall
supply samples of materials before in corporation in the works for approval as may be required by the engineer
in-charge Representatives of competent authority of Jamia Hamdard.
5. The rate apply to all works irrespective of its shapes size, quantity and position whether monolithic or cast in
situation obtaining exact profile includes the cost of carriage hoisting and laying in position. (NO EXTRA
PAYMENT SHALL BE PAID SEPARATELY ON ANY ACCOUNT)
6. The material should be of approved quality and manufacture (ISI) marks as approved by Engineer in charge.
7. The rates shall be included for all heights, lift, wastage, and others.
8. The contractor is advised to inspect the site before quoting the rates in Tender.
9. The in charge of work or representative of the competent authority of Jamia Hamdard may approve any brand
or make of material for the work other then that specified in the tender, and contractor shall be bound to use the
approved brand of material without any extra cost.
CONTRACTORS SIGN & SEAL AS AN ACCEPTENCE OF ALL TERMS & CONDITIONS AS MENTIONED THIS
TENDER DOCUMENT.