JAMIA HAMDARD HAMDARD NAGAR NEW DELHI-62

53 Providing and fixing G.I. Union in G.I. pipe including 2.00 each
cutting and threading the pipe and making long
screws etc. complete (New work) 25 mm nominal
bore.
a 32 mm nominal. 3.00 each
54 Providing and fixing G.I. Union in existing G.I. pipe
line, cutting and threading the pipe and making
long screws including excavation, refilling the earth
or cutting of wall and making good the same
complete wherever required : 25 mm nominal bore.
3.00 each
a 32 mm nominal bore. 2.00 each
55 Providing and fixing concertina coil fencing with
punched tape concertina coil 600 mm dia 10 metre
openable length ( total length 90 m) having 50 nos
rounds per 6 metre length, upto 3 m height of wall
with existing angle iron 'Y' shaped placed 2.4 m or
3.00 m apart and with 9 horizontal R.B.T.
reinforced barbed wire, stud tied with G.I. staples
and G.I. clips to retain horizontal including
necessary bolts or G.I. barbed wire tied to angle
iron all complete as per direction of Engineer-incharge
with reinforced barbed tape(R.B.T.) / Spring
core (2.5mm thick) wire of high tensile strength of
165 kg/ sq.mm with tape (0.52 mm thick) and
weight 43.478gm/ metre (cost of M.S. angle, C.C.
blocks shall be paid separately) metre
56 Cutting holes up to 30x30 cm in walls including
making good the same: With common burnt clay
F.P.S. (non modular) bricks.
57 Cutting holes up to 15x15cm in R.C.C. floors and
roofs for passing drain pipe etc. and repairing the
hole after insertion of drain pipe etc. with cement
concrete 1:2:4 (1 cement :2 coarse sand : 4 graded
stone aggregate 20 mm nominal size) including
finishing complete so as to make it leak proof.
45.00 Mt.
25.00 each
1.00 each
Amount in words
Contractor's Signature & Seal