JAMIA HAMDARD HAMDARD NAGAR NEW DELHI-62

Schedule of Quantities for the repair of B- block (06) flats at Pul Pehlad
S.
No
Descrption of Item Qty Unit Rate Amount
1 Providing and laying in position specified grade of
reinforced cement concrete excluding the cost of
centring, shuttering, finishing & reinforcement - All
work up to plinth level : 1:1.5:3 (1 cement : 1.5
coarse sand : 3 graded stone aggregate 20 mm
nominal size)
2 Centring and shuttering i/c strutting, propping etc.
and removal of form for suspended floors, roofs,
landings, balconies and access platform.
3 Steel reinforcement for R.C.C. work including
straightening, cutting, bending, placing in position
and binding all complete upto plinth level. Cold
twisted bars.
4 Brick work with common burnt clay F.P.S. (non
modular) bricks of class designation 7.5 in
superstructure above plinth level up to floor V level
in all shapes and sizes in cement mortar 1:6 (1
cement : 6 coarse sand)
5 Mirror polishing on marble work/Granite work/stone
work where ever required to give high gloss finish
complete.
6 Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st
class hard wood and well matched commercial 3
ply veneering with vertical grains or cross bands
and face veneers on both faces of shutters: 35 mm
thick including ISI marked Stainless Steel butt
hinges with necessary screws.
7 Providing and fixing panelled or panelled and
glazed shutters for doors, windows and clerestory
windows including ISI marked M.S. pressed butt
hinges bright finished of required size with
necessary screws excluding, panelling which will
be paid for separately, all complete as per direction
of Engineer-in-charge. Second class teak wood 35
mm thick
8 Providing and fixing ISI marked flush door shutters
conforming to IS: 2202 (Part I) non-decorative type,
core of block board construction with frame of 1st
class hard wood and well matched commercial 3
ply veneering with vertical grains or cross bands
and face veneers on both faces of shutters: 25mm
thick (for cupboard) including ISI marked nickel
plated bright finished M.S. piano hinges with
necessary screws.
1.00 Cum
5.00 sq.mt
35.00 Kg.
1.50 Cu.mt.
700.00 Sq.mt.
5.00 Sq.mt.
5.00 Sq.mt.
5.00 Sq.mt.