JAMIA HAMDARD HAMDARD NAGAR NEW DELHI-62

More documents

Recommendations

Info

Schedule of Quantities for the repair of B- block (06) flats at Pul Pehlad S. No Descrption of Item Qty Unit Rate Amount 1 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing & reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) 2 Centring and shuttering i/c strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. 3 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars. 4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in cement mortar 1:6 (1 cement : 6 coarse sand) 5 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. 6 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. 7 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood 35 mm thick 8 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. 1.00 Cum 5.00 sq.mt 35.00 Kg. 1.50 Cu.mt. 700.00 Sq.mt. 5.00 Sq.mt. 5.00 Sq.mt. 5.00 Sq.mt.
9 Extra for providing lipping with 2nd class teak wood 10.00 Sq.mt. battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). 10 Providing and fixing nickel plated M.S. pipe curtain 40.00 mt. rods with nickel plated brackets: 20 mm dia (heavy type) 11 Providing and fixing aluminium sliding door bolts ISI 96.00 each marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm 12 Providing and fixing aluminium tower bolts ISI 96.00 each marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 200x10 mm b 150x10 mm 96.00 each 13 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm. 14 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper. 15 Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality. Double strip (horizontal type). 16 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 17 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3m and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides. 18 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete. With 5.5 mm thick glass panes. 19 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab i/c rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick. 196.00 each 96.00 each 112.00 each 50.00 Kg. 15.00 Sq.mt. 102.00 Sq.mt. 2.00 Sq.mt.
Page 1 and 2: JAMIA HAMDARD HAMDARD NAGAR NEW DEL
Page 3: JAMIA HAMDARD HAMDARD NAGAR, NEW DE
Page 7 and 8: JAMIA HAMDARD HAMDARD NAGAR NEW DEL
Page 9 and 10: AGREEMENT FORMATE Article of Agreem
Page 11 and 12: 9. INTERPRETATION In interpreting t
Page 13 and 14: 21. REFUND OF DEPOSIT The E.M.D. of
Page 15 and 16: 30. RECEIPT OF TENDER Tender shall
Page 17: GENERAL SPECIFICATION All work shal
Page 21 and 22: 30 Removing white or colour wash by
Page 23: 53 Providing and fixing G.I. Union

JAMIA HAMDARD HAMDARD NAGAR NEW DELHI-62

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?