Maintenance and Repair Manual for SAF Disc ... - Jupojos technika
Maintenance and Repair Manual for SAF Disc ... - Jupojos technika
Maintenance and Repair Manual for SAF Disc ... - Jupojos technika
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Installation Instructions – PAN 19-1<br />
Installation sequence:<br />
Press in two new bushes 70.3 <strong>for</strong> the long guide pin 70.1.<br />
First (A) press in the inner bush with a drifter (L 1 = 52.2 ± 0.2 mm) <strong>and</strong><br />
then (B) the outer bush with a drifter (L 2 = 13.2 ± 0.2 mm) until the<br />
drifter bottoms in each bore.<br />
Grease the sliding surfaces of the bushes <strong>and</strong> the gap between the<br />
bushes.<br />
L 1<br />
L 2<br />
A<br />
B<br />
Fig. 42<br />
Press in one new bush 80.3 <strong>for</strong> the short guide pin 80.2.<br />
Press in bush (C) with a drifter (L 3 = 25.7 ± 0.2 mm) until the drifter<br />
bottoms in the bore.<br />
Grease the sliding surface of the bush.<br />
L 3<br />
C<br />
Fig. 43<br />
Press new green protective caps 80 into the seal seat (ring groove /<br />
arrow) of the brake calliper 59, 60.<br />
59, 60<br />
Note: Clean the seal seats be<strong>for</strong>e pressing in the caps.<br />
The seal seats must be grease-free.<br />
The protective caps 80 can be pressed into the seal seat by h<strong>and</strong>.<br />
Ensure that the protective cap fits uni<strong>for</strong>mly in the seal seat of the brake<br />
calliper!<br />
80<br />
Fig. 44<br />
SK RB/RLB 9019 WI with WABCO PAN 19-1 11.411GB Edition 09/05 - 38 -
Change language