Transmission - JustAnswer
Transmission - JustAnswer
Transmission - JustAnswer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Transmission</strong><br />
Removal (cont'd)<br />
8. Disconnect the transmission ground cable from the<br />
transmission.<br />
15. Disconnect the vehicle speed sensor connector.<br />
9. Disconnect the lock-up control solenoid and the<br />
shift control solenoid connectors.<br />
10. Disconnect the throttle control cable from the throttle<br />
control lever.<br />
11. Disconnect the mainshaft speed sensor connector.<br />
12. Remove the ATF cooler hoses at the ATF cooler<br />
lines. Turn the ends of the ATF cooler hoses up to<br />
prevent ATF from flowing out, then plug the hoses<br />
and lines.<br />
16. Remove the transmission housing mounting bolts.<br />
NOTE: Check for any signs of leakage at the hoses<br />
joints.<br />
13. Remove the starter motor cables.<br />
14. Disconnect the countershaft speed sensor and the<br />
A/T gear position switch connector.