Comflex® Rubber Expansion Joints Engineering Guide
Comflex® Rubber Expansion Joints Engineering Guide
Comflex® Rubber Expansion Joints Engineering Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Special Parts<br />
Earth Cover<br />
Available for all types with or without tie bar.<br />
The earth cover is a two piece cover, which is especially<br />
designed to protect rubber expansion joints in the earth.<br />
It is designed not to limit expansion joint movement.<br />
Design:<br />
Two-piece cover of S 235 JR G2 (RSt 37-2) or<br />
stainless steel. Fixing takes place with clamps which<br />
are permanently joined to the halves of the covers.<br />
Note:<br />
Easy installation, due to two-piece design.<br />
It must be ensured during installation that downward<br />
drainage is possible.<br />
Safety expansion joint<br />
Available for all types with or without tie bar.<br />
The safety expansion joint is used for aggressive<br />
media for the purpose of leakage monitoring (2-bellows<br />
system).<br />
Pressure balanced expansion joint<br />
Available for all types. The pressure balanced<br />
expansion joint absorbs the reaction forces within<br />
the restraint and is suitable for absorbing axial<br />
and lateral movement.<br />
To order or get further details, call your local contact 51 shown on rear cover or listed at www.jameswalker.biz 51