Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Header Lionsele ® W3 wiper for rods<br />
Wipers & scrapers<br />
Lionsele ® W3<br />
Double-acting wiper<br />
Description<br />
Lionsele ® W3 is a double-acting<br />
wiper manufactured from tough,<br />
wear resistant polyurethane (AU/EU).<br />
Its robust outer wiper lip excludes<br />
contaminants from the hydraulic system,<br />
and the internal wiper lip collects fluids<br />
that bypass the primary rod seal, to give<br />
dry rod performance.<br />
Special features<br />
• Double-acting for contamination<br />
exclusion and dry rod performance.<br />
• Chamfered sealing lips provide<br />
minimum fluid film conditions.<br />
• Moulded in high performance<br />
polyurethane.<br />
Typical applications<br />
This double-acting wiper is typically used<br />
in conjunction with a suitable rod seal —<br />
eg, Lionsele ® G, Lionsele ® U2 or Lofilm ® .<br />
It is invaluable for applications where the<br />
residual film of fluid left on the rod by the<br />
primary seal cannot be tolerated.<br />
Operating capabilities<br />
• Temperature range:<br />
-30°C to +100°C (-22°F to +212°F).<br />
Materials of construction<br />
Precision moulded in wear-resistant<br />
polyurethane (AU/EU).<br />
Media capabilities<br />
Lionsele W3 is suitable for use with<br />
most mineral-based hydraulic fluids at<br />
up to 100°C (212°F). It is also suitable<br />
for exposure to air, water, and most<br />
lubricating oils and greases.<br />
Before use with fire-resistant fluids of the<br />
water/oil emulsion or water/glycol types,<br />
please consult our Technical Support<br />
Team for advice on temperature limits.<br />
JAMES WALKER S.P.S. Ltd.<br />
Marcoms Department<br />
Lionsele ® W3 typical housing<br />
See Appendix Q (page 71) for preferred<br />
housing designs to BS ISO 6195 Type C.<br />
How supplied<br />
(Also see <strong>Hydraulic</strong> sealing products —<br />
Size charts, which can be downloaded<br />
from www.jameswalker.biz)<br />
This wiper is available as standard for<br />
installation in housings to BS ISO 6195<br />
Type C. Other sizes can readily be<br />
supplied.<br />
Fitting instructions are supplied with each<br />
pack of wiper rings.<br />
Leaflet :<br />
Date : Sketch reference :<br />
<strong>Hydraulic</strong> <strong>Sealing</strong> Products<br />
1/03/2010 Lionsele W3 - 002<br />
Lionsele W3 - Wiper ; ISO 6195 Type C ; Housed<br />
Direction<br />
of<br />
pressure<br />
Bearing housing<br />
Seal housing<br />
42<br />
To order or for further details, call your local contact shown on rear cover or listed at www.jameswalker.biz