Photovoltaic Solar Inverter Series ES - Effekta

Photovoltaic Solar Inverter Series ES Control panel
2 LED display
3 Operating keys
Red LED lights up constantly - indicates a ground fault or
an isolation fault at the DC input.
Yellow LED lights up constantly - indicates that the supply
(voltage, frequency, etc.) does not correspond to the en-
tered standard of the PV solar inverter.
o Green LED lights up constantly - indicates that the
performance of the solar cells is greater than 5 % of
the nominal performance of the solar inverter.
o Green LED blinks - indicates that the performance of
the solar cells is less than 5 % of the nominal per-
formance of the PV solar inverter.
Confirm a change to the settings of the PV solar inverter.
Continue to next page or change the settings of the PV
solar inverter.
Return to the previous page or change the settings of the
PV solar inverter.
Special function Log in / Log out.
ES series 29