1 Prosthetics - Orto Finland

3 Materials
3.6 Tools
Laminating and Thermoforming Tools
Laminating Jig
Facilitates perfect two-channel suction by using a model holding pylon. All pylons with diameters between 8 and 25 mm can be easily
clamped into the laminating jig. The laminating jig is directly fixed on the workbench or in the vise. Can be easily disassembled and
cleaned. Version 1 (Ø 100 mm) is especially designed for lamination of upper extremity prosthetics and other small models.
Ø 100 mm
Ø 130 mm
Order No. Ø / mm Article No. Pict.
WZ155-1 100 4 339 010 00 00 100 1
WZ155-2 130 4 339 010 00 00 130 2
1 2
6
2
3
1
7
12
13
9
11
10
4
8
14
Replacement Parts for Laminating Jig
5
Order No. Description Ø / mm Thickness Size Article No. Pict.
E-WZ42 Laminating Jig (basic equipment) 100 4 339 011 01 00 100 1
E-WZ43 Laminating Jig (basic equipment) 130 4 339 011 01 00 130 as 1
E-WZ44 Main Tube for Laminating Jig 4 339 011 16 00 000 no pict.
E-WZ45 Vacuum Forming Disk 100 thick (22 mm) 4 339 011 02 00 100 2
E-WZ46 Vacuum Forming Disk 130 thick (22 mm) 4 339 011 02 00 130 as 2
E-WZ47 Vacuum Forming Disk 100 thin (6 mm) 4 339 011 03 00 100 3
E-WZ48 Vacuum Forming Disk 130 thin (6 mm) 4 339 011 03 00 130 as 3
E-WZ49 Hose nozzle 4 339 011 04 00 000 4
E-WZ50 Bench-top vise supporter 4 339 011 05 00 000 5
E-WZ51 Double-pylon clamp vise, complete 4 339 011 06 00 000 6
E-WZ52 Rubber stopper small 4 339 011 07 00 000 7
E-WZ53 Rubber stopper large 4 339 011 08 00 000 as 7
E-WZ54 Headless screw M8 x 12 4 339 011 09 00 000 8
E-WZ55 Headless screw M12 x 20 4 339 011 10 00 000 9
E-WZ56 Countersunk head screw M5 x 12 4 339 011 11 00 000 10
E-WZ57 Flat-head screw M6 x 25 4 339 011 12 00 000 11
E-WZ58 Clamping ring 4 339 011 13 00 000 12
E-WZ59 Vise supporter 100 4 339 011 14 00 000 13
E-WZ60 Vise supporter 130 4 339 011 15 00 000 as 13
E-WZ61 O-Ring for Laminating Jig 4 339 011 17 00 000 no pict.
E-WZ67 Clamping lever for double pylon clamp vise M 12 (handle only) 4 340 011 05 00 000 14
174