user manual - Utax

Default Setting (System Menu)
Original Orientation
Set the original orientation defaults. The available default settings are shown below.
Item
Top Edge on Top
Top Edge on Left
Description
Select the original's top edge at the top.
Select the original's top edge at the left.
Refer to page 4-9 for Original Orientation.
Use the procedure below to select the default orientation when originals are placed on the platen.
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function Defaults and then [Change] of Original Orientation.
3 Select [Top Edge on Top] or [Top Edge on Left] for the default.
4 Press [OK].
Original Image (Copy)
Select the default original document type for copying. The available default settings are shown below.
Item
Text+Photo (Printer)
Text+Photo (Magazine)
Photo (Printer)
Photo (Magazine)
Photo (Photo Paper)
Text
Text (Fine Line)
Graphic/Map (Printer)
Graphic/Map (Magazine)
Description
For mixed text and photo documents printed on this machine
originally.
For mixed text and photos printed in a magazine, etc.
For photos printed on this machine originally.
For photos printed in a magazine, etc.
For photos taken with a camera.
Sharply renders pencil text and fine lines.
For maps and diagrams printed on this machine originally.
For maps and diagrams printed in a magazine.
9
9-17