SPECIFICATIONS FOR SMOKE GENERATOR

SPECIFICATIONS FOR SMOKE GENERATOR
No. &date 74
DATE : 29 / 8 / 2011
SCOPE To be used for generating smoke in fire fighters training
-Technical offers should explain each item required in our form below in details
(Comply, provided, refer to ….etc) comments are not acceptable at all.
-Technical offers will be studied according to the answers and comments, which have to be filled in our
specification form below.
- Technical offer should include product catalogue.
Page 1 of 3

Required Specification
1 Ability to control the smoke density.
Mechanism of controlling the smoke density
and density range should be described.
2 Ability to adjust smoke quantity.
Mechanism of adjusting the smoke quantity
and quantity range should be described.
3 Ability to regulate evaporation ratio.
4 Two heating elements, could be switch on
independently.
5 Warm up time: to be mentioned.
6 Fluid inlet pressure : to be specified.
7 Power consumption: to be specified.
8 Different operating modes: to be described.
9 Light weight : weight to be specified.
10 Easy to handle and transport, mechanism to
be specified.
11 Electronic control panel and display should
be described.
12 Tank capacity and fluid consumption to be
mentioned
13 The generated smoke should be free of toxic
and oil materials, and doesn’t leave any
harmful residue.
14 Particle size: to be mentioned.
Detail
Tender’s Specification
Brand
Name
Model No.
Origin
Page 2 of 3

15 Fluid spare quantity:
Supplying of fluid quantity to be enough to
operate the smoke generator for 50 hours at
maximum discharge ratio, life shelf time for
fluid to be specified.
General
1 The unit should be approved by international
standard
2 Catalogs for use, maintenance and spare
parts for each component should be
provided.
3 List of recommended spare parts should be
provided.
4 Training of use and maintenance on CD .
5 The supplier should guarantee spare parts
supplying for both the smoke generator and
fluid for minimum of ten years.
Page 3 of 3