Dyna Helix® Implant System - Dyna Dental

Determination o f h e i g h t
Determination of height can easily be done by eans of the Dyna healing
abutments. There is a choice in different types depending on the
type of construction that has been chosen. By means of the markings
the height of the definitive abutments can be determined simpler.
So accurately measure the Gingiva
Height (GH) after the healing period
= distance between the upper side
of the implant and the gingiva
The standard healing abutment ø 4mm has height markings on 2 and
4mm and has a total height of 6mm (82HE6).
82HE6
4
2
6 mm
Imp r e s s i o n ta k i n g
To guarantee an optimal impression at implant level when using
open tray technique, the following options are available:
Impression coping octa (without octa) incl. screw (82IC2)
Impression coping octa short (without octa) incl. screw (81IC0)
Impression coping octa (with octa) incl. screw (81IC2)
Impression coping octa short (with octa) incl. screw (81IC1)
12,25 mm
9,25 mm
81IS2
81IS1
82IC2
81IC0
81IC2
81IC1
30Ncm
Torque
Re m o v a b l e prosthetics
For removable prosthetics different abutment systems are available.
Each has its own indication area and unique characteristics.
The use of a Torq wrench (30Ncm for all abutments, but 35Ncm for
extension abutments) in combination with the Dyna Octalock connection
prevents loosening of the abutments.
Looking at hygiene aspects, the following heights above
the gingiva are recommended:
Magnetic abutment
82MG...
3, 4, 5mm
84MG1
~1.5mm
Available in 3, 4 and 5mm height for Dyna Helix DC/ST (82MG3,
82MG4, 82MG5) and 1mm height for Dyna Helix TM (84MG1).
Ball abutment
~0.5 - 1.0mm
I.A. Bar en SFI Bar abutment
Extension abutment
0, 1, 2, 3, 4, 5, 6mm
~0.5 - 1.0mm
Two types of completely prefabricated titanium bar systems. Both
systems used extension abutments of 0 till 5 mm (+6mm for IA Bar)
(I.A.Bar 82IE0 till 82IE6, SFI Bar 82SF0 till 82SF5). Info about the
bars can be found in the pricelist and manuals.
Heights untill the bar then are respectively 1.5
(H0), 2.5 (H1), 3.5 (H2), 4.5 (H3), 5.5 (H4), 6.5 (H5)
and 7.5mm (H6) using an implant with a Ø4.0mm
platform
82IE...
82SF...
~0.5 - 1.0mm
An extension abutment of 5mm (82EO5) has the same internal connection
as an implant and is available for increasing the height of
excisting abutments
Besides that there is also a range of extension abutments with the
name Extension level extension abutments, available in the heights
2, 3, 4, 5 and 6mm (82EL2 till 82EL6). These abutments can be used
on implant level and in combination with special abutments. Extension
level abutments 0mm are available for magnet (82EM0), ball
(82EB0C), cementable bar (89BR0), bar goldcylinder (89BG0) and
bar POM cylinder (89BP0). In the bar sets a special extension level
abutment screw (82ES0) is enclosed. This screw is also available in
a longer version (82ES1).
Dyna Helix ® DC/ST implants are, first of all, designed for two-phase
surgery. Under special circumstances, when all conditions are met,
these can also be used in one-phase surgery. For these situationsDyna
fabricated special tulip shaped healing abutments that make stitching
of the mucosa under the abutment possible. These abutments
are available in the heights 3.5mm, 4.5mm and 5.5mm (83HE35,
83HE45, 83HE55). These healing abutments also have heightmarkings
at 2 and 4 mm.
5,5 mm
4,5 mm
3,5 mm
83HE35
2
83HE45
2
83HE55
The healing abutments ø 5mm for fixed constructions are available
in the heights 2mm, 4mm and 6mm (81HE2, 81HE4, 81HE6). Height
markings are available at 2, 3 and 4mm. The healing abutment ø
6mm (81HA6) only has a marking at 3mm and is used for preparing
the sulcus on using the Dyna Angled and Straight XL abutments.
4
2
When no transfer of the internal octagon is needed, the closed
tray technique can be used:
Impression coping octa CIT (closed tray technique) (82EI0)
Impression coping octa CIT H8 (closed tray technique) (82EI08)
82EI0
5 mm
82EI08
8 mm
For a transfer of the intra oral situation to the model in the laboratory
several implant analogues are available:
Implant Analog octa (81IA0)
Implant Analog Helix TM octa (83IA0)
IA Bar Implant Analog (02IA0)
Extension Level Implant Analog (82IA0)
Ball Laboratory Patrix (5767C)
Verkrijgbaar in 0, 1, 2, 3, 4, 5 en 6mm (82BL0C t/m 82BL6C).
Bar Constructions
82BL3C
0, 1, 2, 3, 4, 5, 6mm
~0.5 - 1.0mm
Several types of abutments are availabe for fabricating a bar construction.
Goldcylinder octa (82BG0)
POM cylinder octa (82BP0)
Titanium cylinder octa H10 (82BT10)
Universal (cast to) abutment octa (no octa) (81UA0)
Universal (cast to) abutment octa (with octa) (81UA1)
Universal (castable) plastic abutment octa (81UP1)
(Alle abutments worden in het implantaat vastgezet door middel
van een universele abutment screw (81AS0)).
81AS0
82EM0
82EO5
82EB0C
5mm
Dyna Locator abutment
89BR0
82EL...
82LC1
82ES0
89BG0
82ES1
2, 3, 4, 5, 6mm
89BP0
Available in 1.5, 3, 4, 5 and 6mm (82LC1, 82LC3 t/m 82LC6)
~0.5 - 1.0mm
1.5, 3, 4, 5, 6mm
6 mm
4 mm
2 mm
10 mm
5 mm 12 mm
Dyna Temporary abutment
81HE2
81HE4
81HE6
81HA6
81IA0
83IA0
02IA0
82IA0
5767C
82BG0
82BP0
82BT10
81UA0
81UA1
81UP1
Available without octa (81TA0) or
with octa (81TA1)
81TA0
81TA1