WATTS 150A Water Hammer Arrestor WATTS ... - Watts Industries
WATTS 150A Water Hammer Arrestor WATTS ... - Watts Industries
WATTS 150A Water Hammer Arrestor WATTS ... - Watts Industries
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>WATTS</strong> <strong>150A</strong><br />
Air tight sealing cap<br />
4 Standard tire valve under cap<br />
for easy charging<br />
Square top with larger air capacity<br />
for greater shock absorption<br />
Pre-charged air chamber permanently<br />
separated from the water system<br />
Molded diaphragm with al thick rubber<br />
bead for long lasting resistance to wear<br />
Special thermo-plastic coating<br />
to prevent rust<br />
½” BSP brass adaptor for easy assembly<br />
The <strong>Watts</strong> adaptor for an even better damping result<br />
A special <strong>Watts</strong> adaptor allows you to<br />
control water hammer noises even better.<br />
This adaptor allows you, for example, to<br />
mount the <strong>Watts</strong> water hammer arrestor<br />
<strong>150A</strong> in such a way that it is positioned in<br />
exactly the same direction as the return<br />
water fl ow (see installation examples).<br />
The rubber membrane will directly absorb<br />
the increased water pressure. The damping<br />
effect will then be even more effective.<br />
When mounting the damper on the adaptor,<br />
the thread should be provided with Tefl on<br />
tape.