25.04.2014 Views

2. Occupational safety / Security Eye protection 170 ... - Labochema

2. Occupational safety / Security Eye protection 170 ... - Labochema

2. Occupational safety / Security Eye protection 170 ... - Labochema

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

GENERAL CATALOGUE 2010/11<br />

<strong>2.</strong> <strong>Occupational</strong> <strong>safety</strong> / <strong>Security</strong><br />

Breathing <strong>protection</strong>/Half masks<br />

1<br />

Respirator, Barimask ABEK 15<br />

Half mask with in- and exhalation valves, a fitted cartridge filter (15 min ABEK) supplied in a sealed box with belt clip<br />

and additional hand loop (acc. DIN 58647-7). Shelf life: approximately 5 years.<br />

1<br />

Type PK Cat. No.<br />

Barimask ABEK 15 1 9.005 576<br />

2<br />

Half mask 620 S<br />

EN 140 approved. CE mark.<br />

Made of silicone. Ideal for those with skin allergies.<br />

Can be used as pure filtration device and also as a mask only for air-fed systems. Standard thread connection<br />

approved to EN 148-1 allows cost-efficient use of screw-type filters on reusable filter mounts in addition to standard<br />

screw-type filters. Two exhalation valves ensure low respiratory resistance. Patented roller clip straps ensure a high<br />

level of comfort with rapid adjustment, tightening or loosening. Headband fastening on the valve device prevents<br />

deformation of the mask through excessive strain. Ergonomic design of the mask body and sealing zone make one<br />

size of mask suitable for all faces.<br />

2<br />

Type PK Cat. No.<br />

Half mask 620 S 1 9.005 575<br />

3 4<br />

Respiratory <strong>protection</strong> - plug-in filters for half mask 620 S<br />

Tested and approved to EN141/EN143 standards with CE mark.<br />

Plug-in filters are connected to the mask by a filter mount. The filter mount is fitted with standard thread connections<br />

to EN 148-1.<br />

3<br />

Particle filter P 3 consists of a light PE housing with a built-in annular filter. Special folding provides a large filter<br />

surface area in a confined space.<br />

A pre-filter collects aerosol mist and dust and prevents rapid accumulation of dirt particles in the main filter, thereby<br />

prolonging its lifespan. Easy to exchange by inserting into the outer chamber of the filter mount. Inflammable.<br />

Filter type A:<br />

Filter type B:<br />

Filter type E:<br />

Filter type K:<br />

Filter type P 1:<br />

Filter type P 2:<br />

Filter type P 3:<br />

Vapours from organic compounds with boiling point >65°C<br />

Inorganic gases and vapours e.g. chlorine<br />

Sulphur dioxide<br />

Ammonia<br />

Low particle filtration capacity<br />

Medium particle filtration capacity<br />

High particle filtration capacity<br />

4<br />

Type<br />

Filter<br />

size<br />

PK<br />

Cat. No.<br />

Gas filter 19 A<br />

Gas filter 19 B<br />

Gas filter 34 ABEK<br />

Particle filter 25 P 3<br />

Pre-filter 35/70<br />

Filter mount 5570/35<br />

Filter mount 5570/70<br />

EN 141-A1<br />

EN 141-B1<br />

EN 141-A1-B2-E1-K1<br />

P 3<br />

-<br />

for filters 19A, 19B, 24 P2, 25P3<br />

for filter 34 ABEK<br />

1<br />

1<br />

1<br />

1<br />

20<br />

1<br />

1<br />

9.005 580<br />

9.005 581<br />

9.005 583<br />

9.005 585<br />

9.005 577<br />

9.005 586<br />

9.005 587<br />

E & OE.<br />

183

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!