Bearing, Shafts, Clamps,Collars,Hubs & Keys - Electronic Fasteners ...

STAINLESS GROUND SHAFTS
DIAMETER
MATERIAL
1/4” 303 STAINLESS STEEL
• Precision ground finish
• Straight within .0003 in./in.
• Send sketch for quotation on modifications
Available on request:
• Retainer ring grooves
• Special shaft lengths
• Journals
• Drilled holes
• Milled flats
STOCK STOCK STOCK
NO. A NO. A NO. A
S4-10 1.000 S4-37 3.750 S4-70 7.000
S4-11 1.125 S4-38 3.875 S4-72 7.250
S4-12 1.250 S4-40 4.000 S4-75 7.500
S4-13 1.375 S4-41 4.125 S4-77 7.750
S4-15 1.500 S4-42 4.250 S4-80 8.000
S4-16 1.625 S4-43 4.375 S4-82 8.250
S4-17 1.750 S4-45 4.500 S4-85 8.500
S4-18 1.875 S4-46 4.625 S4-90 9.000
S4-20 2.000 S4-47 4.750 S4-95 9.500
S4-21 2.125 S4-48 4.875 S4-100 10.000
S4-22 2.250 S4-50 5.000 S4-105 10.500
S4-23 2.375 S4-51 5.125 S4-110 11.000
S4-25 2.500 S4-52 5.250 S4-117 11.750
S4-26 2.625 S4-53 5.375 S4-120 12.000
S4-27 2.750 S4-55 5.500 S4-130 13.000
S4-28 2.875 S4-56 5.625 S4-140 14.000
S4-30 3.000 S4-57 5.750 S4-150 15.000
S4-31 3.125 S4-58 5.875 S4-160 16.000
S4-32 3.250 S4-60 6.000 S4-180 18.000
S4-33 3.375 S4-62 6.250 S4-200 20.000
S4-35 3.500 S4-65 6.500 S4-220 22.000
S4-36 3.625 S4-67 6.750 S4-240 24.000
DIAMETER
MATERIAL
5/16” 303 STAINLESS STEEL
• Precision ground finish
• Straight within .0004 in./in.
• Send sketch for quotation on modifications
Available on request:
• Retainer ring grooves
• Special shaft lengths
• Journals
• Drilled holes
• Milled flats
STOCK STOCK STOCK
NO. A NO. A NO. A
S5-13 1.375 S5-38 3.875 S5-70 7.000
S5-15 1.500 S5-40 4.000 S5-72 7.250
S5-16 1.625 S5-41 4.125 S5-75 7.500
S5-17 1.750 S5-42 4.250 S5-77 7.750
S5-18 1.875 S5-43 4.375 S5-80 8.000
S5-20 2.000 S5-45 4.500 S5-85 8.500
S5-21 2.125 S5-47 4.750 S5-90 9.000
S5-22 2.250 S5-48 4.875 S5-95 9.500
S5-23 2.375 S5-50 5.000 S5-100 10.000
S5-25 2.500 S5-51 5.125 S5-110 11.000
S5-26 2.625 S5-53 5.375 S5-120 12.000
S5-27 2.750 S5-55 5.500 S5-130 13.000
S5-28 2.875 S5-56 5.625 S5-140 14.000
S5-30 3.000 S5-57 5.750 S5-150 15.000
S5-31 3.125 S5-58 5.875 S5-160 16.000
S5-32 3.250 S5-60 6.000 S5-180 18.000
S5-33 3.375 S5-62 6.250 S5-200 20.000
S5-35 3.500 S5-65 6.500 S5-220 22.000
S5-37 3.750 S5-67 6.750 S5-240 24.000
1-800-232-BERG I 24 WWW.WMBERG.COM