Stryker Hand Plating System Flyer
Stryker Hand Plating System Flyer
Stryker Hand Plating System Flyer
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
VARIABLE ANGLE LOCKING PLATES<br />
STANDARD NON–LOCKING PLATES<br />
<strong>Stryker</strong> <strong>Hand</strong><br />
<strong>Plating</strong> <strong>System</strong><br />
COMPRESSION PLATES<br />
LOCKING SCREWS<br />
BONE SCREWS<br />
<strong>Stryker</strong> Leibinger GmbH & Co. KG<br />
Bötzinger Straße 41<br />
D-79111 Freiburg<br />
Germany<br />
www.osteosynthesis.stryker.com<br />
The information presented in this brochure is intended to demonstrate a <strong>Stryker</strong> product. Always refer<br />
to the package insert, product label and/or user instructions before using any <strong>Stryker</strong> product. Surgeons<br />
must always rely on their own clinical judgment when deciding which products and techniques to use<br />
with their patients. Products may not be available in all markets. Product availability is subject to the<br />
regulatory or medical practices that govern individual markets. Please contact your <strong>Stryker</strong><br />
representative if you have questions about the availability of <strong>Stryker</strong> products in your area.<br />
EMERGENCY SCREWS<br />
<strong>Stryker</strong> Corporation or its subsidiary owns the registered trademark: <strong>Stryker</strong><br />
<strong>Stryker</strong> or its subsidiary owns, uses or has applied for the trademark: Variax<br />
Literature Number: 90-07556<br />
LOT A2107<br />
Copyright © 2007 <strong>Stryker</strong><br />
Printed in Germany
1.2mm Bone Screws<br />
1.7mm Bone and Locking Screws<br />
STANDARD Plates<br />
Thickness: 0.55mm<br />
STANDARD Plates<br />
Thickness: 0.55mm<br />
LOCKING Plates<br />
Thickness: 1.0mm<br />
DEDICATED ROTATION PLATES<br />
• Locking and standard versions.<br />
• Use with 1.7mm or 2.3mm screws.<br />
• Allows for correction on the rotational<br />
and lengthwise axis.<br />
DEDICATED MC5<br />
FRACTURE PLATES<br />
• Anatomically shaped.<br />
• Use with 2.3mm screws.<br />
• Oblong hole allows for<br />
precise adjustment in<br />
relation to the joint.<br />
• Locking feature may provide<br />
the stability needed to support<br />
the metaphyseal region.<br />
LOCKING Plates<br />
Thickness: 1.5mm<br />
COMPRESSION Plates<br />
Thickness: 1.0mm and 1.3mm<br />
STANDARD Plates<br />
Thickness: 1.0mm<br />
2.3mm Bone and Locking Screws<br />
Advanced Screw Design<br />
PATENTED SmartLock Locking Technology*<br />
Anodization Type II Treatment on<br />
Locking Plates**<br />
-10° +10°<br />
• ONE-STEP SCREW PICK UP. The cross pin head<br />
helps guide the screwdriver blade for proper<br />
blade/screw alignment and does not require grasping<br />
sleeves.<br />
• ROUNDED, LOW-PROFILE SCREW HEADS.<br />
No screw head prominence even at the maximum<br />
locking screw angulation.<br />
This may reduce the risk of soft tissue irritation.<br />
• Allows locking up to ±10° in any direction.<br />
• One-step locking achieved by simply inserting the<br />
screw in the pre-drilled ±10° locking range.<br />
• Increases strength.<br />
• Reduces incidences of tissue adherence.<br />
• Improves tissue glide.<br />
• BLUNT SCREW TIPS. All screws have a blunt tip<br />
and remain self tapping. This may reduce the risk<br />
of soft tissue irritation at the far cortex.<br />
*The SmartLock Technology is patented (US 6, 322 532; DE 43 43 117) by Professor Dietmar Wolter, Hamburg, Germany.”<br />
**Baumann A., Zander, N.; “Ti6Al4V with Anodization Type II: Biological Behavior and Biomechanical Effects“, March 2005.<br />
Note: Locking screws are not for use in standard or compression plates, while bone screws can be used with all plate types.
Change language