10.05.2014 Views

Universal QuikFlap Flyer - Stryker

Universal QuikFlap Flyer - Stryker

Universal QuikFlap Flyer - Stryker

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Headline<br />

Headline<br />

Craniomaxillofacial<br />

<strong>Universal</strong> <strong>QuikFlap</strong><br />

Sterile solution for cranial fixation<br />

1


<strong>Universal</strong> <strong>QuikFlap</strong><br />

Low Profile Plates<br />

• <strong>QuikFlap</strong> can be used for cranial bone flap and cranial<br />

trauma fixation<br />

• <strong>QuikFlap</strong> contains three 2-hole plates and six 1.5 mm neuro<br />

screws. These are offered in self-tapping and self-drilling versions<br />

• QuiKFlap is a practical and disposable solution for cranial fixation.<br />

• <strong>QuikFlap</strong> can be fixated to the cranial bone flap on a sterile table<br />

while the dura is being closed<br />

• All that is required in additional instrumentation is the 1.5 mm<br />

<strong>Universal</strong> Neuro 2 Screwdriver<br />

REF<br />

Description<br />

12-01502 <strong>Universal</strong> <strong>QuikFlap</strong> System,<br />

self-drilling screws,<br />

Ø 1.5 mm, length 4 mm<br />

Complementary Products<br />

12-01512 <strong>Universal</strong> <strong>QuikFlap</strong> System,<br />

self-tapping screws,<br />

Ø 1.5 mm, length 4 mm<br />

REF<br />

Description<br />

29-15036 Accessory Tray<br />

29-15037 Silicon Mat for Accessory Tray<br />

62-15001 <strong>Universal</strong> Neuro 2 Screwdriver Handle<br />

62-15020 <strong>Universal</strong> Neuro 2 Screwdriver Blade, 72 mm<br />

91-12504 Drill 1.2 x 48 mm, working length 4 mm,<br />

<strong>Stryker</strong> J Notch, sterile<br />

13-05507 Low Profile Burr Hole Cover 7 mm with Tab, sterile<br />

13-05510 Low Profile Burr Hole Cover 10 mm with Tab, sterile<br />

13-05514 Low Profile Burr Hole Cover 14 mm with Tab, sterile<br />

13-05520 Low Profile Burr Hole Cover 20 mm with Tab, sterile<br />

This document is intended solely for the use of healthcare<br />

professionals. A surgeon must always rely on his or her own<br />

professional clinical judgment when deciding whether to use<br />

a particular product when treating a particular patient. <strong>Stryker</strong><br />

does not dispense medical advice and recommends that<br />

surgeons be trained in the use of any particular product before<br />

using it in surgery. The information presented in this brochure<br />

is intended to demonstrate a <strong>Stryker</strong> product. Always refer to<br />

the package insert, product label and/or user instructions including<br />

the instructions for Cleaning and Sterilization (if applicable) before<br />

using any <strong>Stryker</strong> products. Products may not be available<br />

in all markets. Product availability is subject to the regulatory or<br />

medical practices that gover individual markets. Please contact<br />

your <strong>Stryker</strong> representative if you have questions about the<br />

availability of <strong>Stryker</strong> products in your area. This document is<br />

not for distribution in the USA.<br />

<strong>Stryker</strong> Corporation or its divisions or other corporate affiliated<br />

entities own, use or have applied for the following trademarks<br />

or service marks: <strong>Stryker</strong>, Leibinger, <strong>QuikFlap</strong>.<br />

All other trademarks are trademarks of their respective owners<br />

or holders. The products listed above are CE marked.<br />

Literature Number 90-01502<br />

1275<br />

LOT A1309<br />

Copyright © 2009 <strong>Stryker</strong><br />

<strong>Stryker</strong> Leibinger GmbH & Co. KG<br />

Bötzinger Straße 41<br />

D-79111 Freiburg<br />

Germany<br />

Tel.: ++49 (0) 7 61 45 12-0<br />

Fax: ++49 (0) 7 61 45 12-120<br />

http://www.leibinger.com<br />

http://www.osteosynthesis.stryker.com<br />

http://www.stryker.com

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!