CO2 laser marker specifications

CO 2 laser marker specifications
General-purpose type
Small spot type
Type for large marking
range
Item
Standard LP-430U-C LP-420S9U-C LP-410U-C LP-431U-C LP-421S9U-C LP-411U-C LP-425S9U-C LP-435U-C LP-310-C
Tower LP-430TU-C LP-420S9TU-C LP-410TU-C LP-431TU-C LP-421S9TU-C LP-411TU-C LP-425S9TU-C LP-435TU-C
Work distance 185mm (+2mm) 111mm (+2mm) 262mm (+2mm) 145mm
Marking range 110mm x 110mm 55 mmx 55mm 160mm x 160mm 50mm x 50mm
Scanning speed Max. 12,000mm/s Max. 6000mm/s Max. 12,000mm/s 2000mm/s
Line speed, up to 240m/min 170m/min 120m/min 85m/min 240m/min not available
Marking laser CO 2 laser, laser class 4
Beam diameter 190µm 160µm 190µm 110µm 95µm 110µm 225µm 265µm 310µm
Ave. output 30W 20W 10W 30W 20W 10W 20W 30W 12W
Ambient temperature 0 to +40°C (no condensation or frost), storage: -10 to 60°C 0-40, -10-50°C
Ambient humidity
Guide laser
Character size
(height & width)
0.2 to 110mm
(adjustable in increments of 0.001mm)
35 to 85%RH (no condensation or frost)
Semiconductor λ = 655nm, laser class 2, 1mW
0.2 to 55mm
(adjustable in increments of 0.001mm)
0.2 to 160mm
(adjustable in increments of
0.001mm)
0.2 to -50m
(adjustable in
increments of
0.001mm)
Wave length 10.6µm 9.3µm 10.6µm 10.6µm 9.3µm 10.6µm 9.3µm 10.6µm 10.6µm
Marking method Stationary, on-the-fly (for moving objects) Stationary
Marking spacing
(spacing & pitch)
0 to 110mm
(adjustable in increments of 0.001mm)
Fan-like: ± 180°
(adjustable in increments of 0.001°)
0 to 55mm
(adjustable in increments of 0.001mm)
Fan-like: ± 180°
(adjustable in increments of 0.001°)
0 to 160mm
(adjustable in increments of
0.001mm)
Fan-like: ± 180°
(adjustable in increments of
0.001°)
0 to -50m
(adjustable in increments
of 0.001mm)
Fan-like: ± 180°
(adjustable in increments
of 0.001°)
Array of character
Straight line, fan-like, proportional/typewriter fonts, tilted and fan-like
Type of characters
Capital & small characters, figures, katakana, hiragana, kanji (JIS level 1 & level 2) symbols,
symbols, user-defined characters (up to 50 types)
Bar codes
CODE39, CODE128, ITF2/5, NW-7, JAN/UPC/EAN, RSS 14, RSS limited, RSS expanded (GS1 Databar)
2D codes
QR, Micro QR, Data Matrix (ECC200)
not available
Composite codes
RSS 14CC-A, RSS 14 stacked CC-A, RSS limited CC-A
Logo/shape
BMP / DXF / HPGL / JPEG
Cooling method
Forced-aired cooling
Supply voltage
100 to 120VAC ±10%, 200 to 240VAC ±10%, 50/60Hz
Power
consumpt.
200VAC 1200W 700W 1200W 700W 1200W 700VA
Input
Remote, trigger, shutter control, laser pumping, alarm reset, emergency stop, laser stop, file number, interlook...
Output
Power supply (+12V), remote (RS232C, I/O), marking ready, marking, marking finished,
laser pumping, warning, alarm, confirmation end, counter finish
Alarm, counter
end, ...
Marking condition On the fly and stationary Stationary
• Correction of intersection • font creation/editing • current date/time marking • expiry date • logos/pictures
• counter marking • system offset • time delay • various processing functions • common setting • guide laser • bold marking
• marking of moving objects • font select • marking image display • marking time measurement • work image display
Functions
• power speed setting per line/logo file • error code display • backup
• laser pointer • proportional marking • multilayered marking • serial data processing & marking • step & repeat • I/O
monitor step & repeat
not available
Emergency stop Provided on the controller ext. needed
Weight Standard head
Tower head
20kg 16kg 20kg 16kg 20kg 13kg
Controller 12kg 11kg 12kg 11kg 12kg Powersp. 5kg
Lifetime
Marking time: 12,000 hours (minimum) (note)
Note: Lifetime indicates operating hours expected under normal operating conditions. It is the period of time between starting to use the device and the
beginning of the wear-out phase. ForPanasonic devices, only the real marking time and not the turn on time has to be considered. This is determined by
the life expectancy of components used in assembly of the unit. The weakest component with the shortest life expectancy determines the life of the whole
product.
MTBF represents the statistical approximation of how long a number of units should operate before a failure can be expected. It does not represent how
long the unit will last. Due to the non-representative figures of MTBF, Panasonic gives only lifetime indications. In certain cases a maximum power drop of
20% can happen after the lifetime period.
20

POWER
series
CO 2 Laser Marker
LP300
175
File no. /
error code indication
4-M5x0.8 depth 6
16
Main power supply
Emergency stop switch6-M6 x 1, depth 10
indicator 200 180 180
Laser radiation
File/Project no.
indicator
Key switch
Alarm reset
Laser pumping 82.5
Remote switch (RS232C, 125I/O)
switch
USB
710
Console connector
100
3
M4 screw depth 6
(on both sides)
Controller
connection cable
4-M4, depth 6
Fixing hole, threaded
Power supply connector
I/O connector
USB connector
19.5
(2.8m) RS232C connector
151
41.5
141
14
(36) 78
145 4-M5x0.8 depth 6
Shutter lever (guide indication laser select lever)
Marking center point
Handle
Marking area 50 x 50
Laser radiation indicator
LP400 standard type
LP400 Tower type
2-M4x0.7
Middle position of head
22.5
6-M6x1, depth 15
7.5
7.5
Cooling fan
315
Laser
radiation
indicator
4
Cooling fan
315
Laser radiation
14.5 indicator
Power supply Focus dial
Air vents connector
Focus adjusting volume
Fuse 2-M4x0,7, depth 10
6-M6x1, depth 15
AC power supply connector
Interlock connector
22.5
Fixing hole
4-M4, depth 10
22.5
Center of marking
Marking range
200
255
2.5
Work distance
210
57.5
ø94
20.8
ø7
Interlock
(109.5) connector (65.5)
Focus adjusting volume
35
USB
M4 screw depth 6 35
19.5
(on both sides)
Console connector
22.5
Controller
(2.8m)
Fixing hole
4-M5x0.8
2-M4x0.7 140depth 6
Fixing hole
connection cable
6-M6x1, depth 15
140
4-M4, depth 10
HandhEld
4-M4, depth
touch
5
screen (optional)
Middle position of head
146
Main power supply
Emergency stop switch 24
15
indicator 310 40
Laser radiation
File/Project Main indicator no.
Emergency stop switch
4-M4, depth 6
41.5
indicator
Laser radiation indicator
Fixing hole, threaded
Key switch
File No. / Error code indicator
Alarm reset
Main power supply indicator
7.5Key switch 7.5
Alarm reset Main switchpower supply indicator
Laser pumping 82.5 27
4-M5x0.8 depth
Remote
6
switch (RS232C, I/O)
switch
340
95
Laser excitation 282.5
Key switch
Remote switch
95
switch
Key
USB
Console connector
272
M4 screw depth 6
LP-300
switch
130
USB connectors
19.5
Laser radiation
Laser radiation
(on both sides)
Console connector
indicator
40 indicator
Controller
(2.8m)
104-M5x0.8 depth 6
connection cable
4-M5 x 0.8 ,
6 deep
2.5
175
27 140 54 390
Focus dial
Work 20distance
ø7
Air vents
Focus dial
Center of marking
116.5
(109.5) (65.5)
Focus adjusting volume
41.5
Marking range
Center of
120
Work distance
Center of
marking
2-M4x0,7, depth 10
Focus adjusting volume
6-M6x1, depth 15
ø94
marking
22.5
30.5
4-M5x0.8 depth 6
6-M6x1, depth 8
4-M5 x 0.8 ,
59.5
2-M4x0.7
7.5 6-M6x1, depth 15
ø94
6 deep
12.5
310 40
Middle position of head
65.5
LP400 Controller
ø30, Laser pointer emission port
7.5
Center of
marking
7.5
Power
supply
connector
Center of
Work distance
marking
Fuse
Focus dial
59.5
30.5
AC power
6-M6x1, depth 8
12.57.5
ø94
supply
12.5
connector
70
65.5
Main power supply
Emergency stop switch
70
ø30, Laser pointer emission port indicator
Laser radiation
File/Project no.
Fixing hole
indicator
Key switch
4-M4, depth 10
12.5
Alarm reset
200
ø30, Laser pointer 57.5emission port
(132.1)
12.5
30
Laser pumping 82.5
170.5
Remote switch (RS232C, I/O)
switch
255
30
210
ø30, Laser pointer emission port
4-M4, depth 6
Fixing hole, threaded
21