XFT-100A - Paramount Fitness
XFT-100A - Paramount Fitness
XFT-100A - Paramount Fitness
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MACHINE SPECIFICATIONS<br />
F EATURES<br />
• Two 130lb. [59 kg.] fully independent weight stacks.<br />
• The cable/pulley arrangement on this machine provides a 2:1 weight reduction. This<br />
means that the handle pull force required to raise the entire 130 lb. weight stack is<br />
actually 65 lb. The advantage of this for functional training is that the weight stack has<br />
1/2 the momentum and 2 times the cable travel of a conventional 1:1 ratio machine.<br />
• (12) weight stack settings. Pull force increments are 5.0lbs [2.3 kg].<br />
• 65 lb. [29.5 kg.] max resistance at cable end (per handle).<br />
• Cable travel is 6.4 feet (77 inches)[194 cm.] per handle.<br />
• Machine weight = 553 lbs. [251 kg.]<br />
• Floor loading = 44 lbs/ft 2 [211 kg/m 2 ]<br />
• 20 vertical arm adjustments labeled “A” through “T”.<br />
• 14 horizontal arm adjustments labeled “1” through “14”<br />
• MAXIMUM user weight = 300 lbs. (136 kg.)<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
*<br />
<br />
<br />
*Max height shown with standard chin-up bar. For low ceiling applications (under 84”),<br />
order optional cross brace <strong>XFT</strong>100-CBR200ALT to replace chin-up bar.<br />
8