Peddimax No. 1 - Peddinghaus
Peddimax No. 1 - Peddinghaus
Peddimax No. 1 - Peddinghaus
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Original-<strong>Peddinghaus</strong><br />
Combined Section Shear with Punch Unit and <strong>No</strong>tcher<br />
<strong>Peddimax</strong> <strong>No</strong>. 1<br />
140 ton<br />
Flat Bar Shear<br />
cuts flat bar<br />
with minimum distortion<br />
up to inch<br />
up to inch<br />
20 x 3/4<br />
12 x 7/8<br />
angle iron, 45° cut up to inch 4 x 1/2<br />
blade cut length inch 20<br />
working height inch 28.4<br />
Section and Bar Stock Shear<br />
cross section max.inch² 5,5<br />
stroke, infinitely adjustable inch 3/8 - 2<br />
cuts with standard blades 90°:<br />
angle iron, 90° cut up to inch 6 x 1/2<br />
rounds inch 2 + 1<br />
squares inch 2+ 1 3/16<br />
cuts with special blades:<br />
channels, 90° cut up to inch 8<br />
I-beams, 90° cut up to inch 8<br />
working height<br />
(to centre of blades)<br />
inch 45.5<br />
Punch Unit<br />
<strong>No</strong>tcher<br />
rated capacity tons 140 with square notching attachment:<br />
stroke, infinitely adjustable inch 3/8 - 2 plate up to inch 1/2<br />
number of strokes, 3/4 mm min -1 29 angle iron up to inch 3 1/2x 3/8<br />
throat depth inch 20 channels in flange inch 3 - 6<br />
working height inch 43.3 I-beams in flange inch 3 - 6<br />
punches with standard punching attachment: notch width inch 2 9/16<br />
with flat die bolster up to inch Ø 1 1/2 in 1 notch depth inch 3 3/8<br />
with universal die block: up to inch Ø 1 1/4 in 1 with triangular notching attachment 90°:<br />
channels in flange inch 4 - 15 plate up to inch 1/2<br />
I-beams in flange inch 4 - 13 angle iron up to inch 2 1/2 x 3/8<br />
channels in web inch 4 - 16 channels in flange inch 3 - 6<br />
I-beams in web inch 4 - 20 I-beams in flange inch 3 - 6<br />
punches with oversize punching attachment: notch depth inch 2 9/16<br />
• SV 58 / 65<br />
up to inch Ø 2 1/4 in 5/8<br />
up to inch Ø 2 1/2 in 1/2 working height inch 43.3<br />
• SV 90 up to inch Ø 3 1/2 in 3/8<br />
Machine Data<br />
power rating HP 15<br />
charge of oil gal. 27<br />
net weight with oil appr. lbs 6100<br />
overall machine dimensions LxWxH cm 80x40x75<br />
ref. no.<br />
All capacities refer to material with a tensile strength of 64000<br />
PSI We reserve the right to make design alterations without<br />
notice.<br />
<strong>Peddinghaus</strong> Corporation<br />
300 <strong>No</strong>rth Washington Ave.<br />
Bradley, IL 60915<br />
Tel. / Phone : 815.937.3800<br />
Fax : 815.937.4003<br />
Internet : www.peddinghaus.com
<strong>Peddimax</strong> <strong>No</strong>. 1<br />
Standard scope of delivery<br />
flat shear blades, 20 1/2 mm long, also for shearing angle iron 45°<br />
material support table with gauge stops on the flat shear station<br />
section shear knife for 90° shearing angle iron as well as rounds and squares<br />
quick-change punching attachment up to 1 1/2 inch Ø, with flat die bolster, for punches and dies of the blue series<br />
or with universal die block for die no. 3<br />
height-adjustable swing-way stripper with exchangeable plate<br />
square notching attachment<br />
material support table on the notcher station<br />
two two-stage foot pedals and electrical control elements on the punch station and the notcher station<br />
hydraulic low pressure spotter for foot operation<br />
connecting sockets for external engagement, e.g. via electrical contact length stop<br />
integrated hydraulic power pack<br />
three-phase A.C. motor, 230 / 460 Volt, 60 Hz<br />
Accessories<br />
522 549 533<br />
electrical contact length stop<br />
hydraulic hold-down for the<br />
gauging system<br />
39, 79 or 118 inch<br />
section shear and flat shear<br />
WBL 4/10 • 4/10 Plus<br />
510 316<br />
roller feed conveyor, 118 inch long,<br />
tooling set<br />
infinitely height adjustable<br />
punches and dies<br />
<strong>Peddinghaus</strong> Corporation<br />
300 <strong>No</strong>rth Washington Ave.<br />
Bradley, IL 60915<br />
Tel. / Phone : 815.937.3800<br />
Fax : 815.937.4003<br />
Internet : www.peddinghaus.com
Original-<strong>Peddinghaus</strong><br />
Combined Section Shear with Punch Unit and <strong>No</strong>tcher<br />
<strong>Peddimax</strong> <strong>No</strong>. 1<br />
1250 kN<br />
Flat Bar Shear<br />
cuts flat bar<br />
with minimum distortion<br />
up to mm<br />
up to mm<br />
500 x 20<br />
300 x 22<br />
angle iron, 45° cut up to mm 100 x 12<br />
blade cut length mm 510<br />
working height mm 720<br />
Section and Bar Stock Shear<br />
cross section max.mm² 3,500<br />
stroke, infinitely adjustable mm 10 - 50<br />
cuts with standard blades 90°:<br />
angle iron, 90° cut up to mm 150 x 12<br />
rounds mm 50 + 25<br />
squares mm 50 + 30<br />
cuts with special blades:<br />
channels, 90° cut up to mm 200<br />
I-beams, 90° cut up to mm 200<br />
working height<br />
(to centre of blades)<br />
mm 1,155<br />
Punch Unit<br />
<strong>No</strong>tcher<br />
rated capacity kN 1,250 with square notching attachment:<br />
stroke, infinitely adjustable mm 10 - 50 plate up to mm 13<br />
number of strokes, 20 mm min -1 29 angle iron up to mm 90 x 10<br />
throat depth mm 510 channels in flange mm 80 - 160<br />
working height mm 1,100 I-beams in flange mm 80 - 160<br />
punches with standard punching attachment: notch width mm 65<br />
with flat die bolster up to mm Ø 39 in 24 notch depth mm 85<br />
with universal die block: up to mm Ø 32 in 24 with triangular notching attachment 90°:<br />
channels in flange mm 100 - 380 plate up to mm 13<br />
I-beams in flange mm 100 - 340 angle iron up to mm 70 x 10<br />
channels in web mm 100 - 400 channels in flange mm 80 - 160<br />
I-beams in web mm 100 - 500 I-beams in flange mm 80 - 160<br />
punches with oversize punching attachment: notch depth mm 65<br />
• SV 58 / 65<br />
up to mm Ø 58 in 15<br />
up to mm Ø 65 in 14 working height mm 1,100<br />
• SV 90 up to mm Ø 90 in 10<br />
Machine Data<br />
power rating kW 11<br />
charge of oil l 103<br />
net weight with oil appr. kg 2,750<br />
overall machine dimensions LxWxH cm 204x102x191<br />
ref. no. 44600<br />
All capacities refer to material with a tensile strength of 450<br />
N/mm². We reserve the right to make design alterations<br />
without notice.<br />
<strong>Peddinghaus</strong> Corporation<br />
300 <strong>No</strong>rth Washington Ave.<br />
Bradley, IL 60915<br />
Tel. / Phone : 815-937-3800<br />
Fax : 815-937-4003<br />
E-mail : info@peddinghaus.com<br />
Internet : www.peddinghaus.com
<strong>Peddimax</strong> <strong>No</strong>. 1<br />
Standard scope of delivery<br />
flat shear blades, 520 mm long, also for shearing angle iron 45°<br />
material support table with gauge stops on the flat shear station<br />
section shear knife for 90° shearing angle iron as well as rounds and squares<br />
quick-change punching attachment up to 39 mm Ø, with flat die bolster, for punches and dies of the blue series<br />
or with universal die block for die no. 3<br />
height-adjustable swing-way stripper with exchangeable plate<br />
square notching attachment<br />
material support table on the notcher station<br />
two two-stage foot pedals and electrical control elements on the punch station and the notcher station<br />
hydraulic low pressure spotter for foot operation<br />
connecting sockets for external engagement, e.g. via electrical contact length stop<br />
integrated hydraulic power pack<br />
three-phase A.C. motor, 400 Volt, 50 cs<br />
Accessories<br />
522 549 533<br />
electrical contact length stop<br />
hydraulic hold-down for the<br />
gauging system<br />
1, 2 or 3 metres<br />
section shear and flat shear<br />
WBL 4/10 • 4/10 Plus<br />
510 316<br />
roller feed conveyor, 3 metres long,<br />
tooling set<br />
infinitely height adjustable<br />
punches and dies October 2008<br />
<strong>Peddinghaus</strong> Corporation<br />
300 <strong>No</strong>rth Washington Ave.<br />
Bradley, IL 60915<br />
Tel. / Phone : 815-937-3800<br />
Fax : 815-937-4003<br />
E-mail : info@peddinghaus.com<br />
Internet : www.peddinghaus.com
Change language