Cavity Pressure Sensor Cavity Pressure Sensor - Priamus
Cavity Pressure Sensor Cavity Pressure Sensor - Priamus
Cavity Pressure Sensor Cavity Pressure Sensor - Priamus
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Data sheet type 6008A / 6008Ax,x-102<br />
Remarks<br />
The sensors including connecting cable can be cleaned in an ultrasonic bath (aqueous tenside solution)<br />
together with the mold inserts if a sealed protecting cap is used.<br />
By standard the pressure sensors are delivered with a mounting nut (standard-mounting). Alternatively the<br />
pressure sensors can also be installed with a distance sleeve.<br />
Dimensions<br />
<strong>Sensor</strong> with cable and connector<br />
Standard-mounting<br />
Borehole in case of mounting nut<br />
Installation situation with mounting nut<br />
Option:<br />
Positioning area<br />
(specify when ordering)<br />
*= Adjust dimension<br />
PRIAMUS SYSTEM TECHNOLOGIES AG 2/4 PRIAMUS SYSTEM TECHNOLOGIES, LLC<br />
Rheinweg 4<br />
3061 Nationwide Parkway<br />
CH-8200 Schaffhausen / Switzerland USA-Brunswick, OH 44212<br />
Tel: +41 (0)52 632 2626 Tel: +1 (0)877 774 2687<br />
Fax: +41 (0)52 632 2627 Fax: +1 (0)877 678 5062<br />
E-Mail: info@priamus.com<br />
E-Mail: salesus@priamus.com<br />
http://www.priamus.com<br />
http://www.priamus.com<br />
DS6008_069e Ed. 09.13<br />
Subject to technical amendments<br />
Projection method: First Angle Projection
Change language