Miele Laundry. Experience the difference. Edition 5 - Euro Appliances

More documents

Recommendations

Info

Versatile installation options Looking at laundry through fresh eyes Washer and tumble dryer stack Where space is at a premium, Miele tumble dryers can be fitted on top of the corresponding washing machine by using the appropriate stacking kit. The result is that two appliances can be accommodated in less than half a square metre of floor space. a b c Min. safety distance from wall: 2 cm Height: Stacking kit with pull-out shelf: approx. 169 cm Stacking kit without pull-out shelf: approx. 170 cm Depth of washer dryer stack: max. 63 cm T 200/4000/8000 T 4000 “i” t 7000 t 7000 series and decor models wtv wtv wtv 412 wtv 414 406 LW 1 ) 410 LW 2 ) no push/pull worktop with push-pull worktop and storage for accessories 48 W 500/3000/5000 W 2000 “i” w 1000 w 1000 series with series straight fascia 1 ) with push-out shelf 2 ) stainless steel fascia available to co-ordinate stainless steel appliances 3 ) without pull-out shelf
Stacking and building under All lotus white freestanding washing machines are suitable for stacking with a lotus white freestanding tumble dryer using the appropriate stacking kit (WTV available to order). The mid and high end range of washing machines and tumble dryers can be fitted under a continuous worktop using the appropriate building under kit (UBS-W/T available to order). The external dimensions of these machines are H x W x D: 85 x 59.5 x 58 cm. Fitting a plinth facing The gap between the lower edge and the floor on all integrated wash ing machines and tumble dryers can be closed up using a suitable kitchen furni ture plinth facing/ kick panel. (Plinth facing/kick panel not supplied by Miele). Both integrated washing machines and tumble dryers have a special groove in which a plinth facing can be fitted. Plinth facing dimensions: Length: 592 –596 mm Thickness: 8 mm Height: The plinth facing height must be calculated after aligning the height of the machine with the screw feet or after fitting the height-adjustment frame(s). Installation surface A concrete floor is the most suitable in stallation surface for a washing machine. If installed on wooden floorboards there is a risk of it vibrating during the spin. We therefore recommend the use of a plywood base (at least 59 x 52 x 3 cm). The base should span several joists and be bolted to the joists and not only to the floorboards. Check for the presence of pipes and cables first. If possible, install the machine in a corner, as this is usually the most stable part of the floor. Integrated appliances Integrated appliances are designed to take a furniture door to match your kitchen. All integrated Miele laundry machines are supplied without a lid al lowing them to be slipped easily under a 820–825 mm worktop. To integrate an appliance under a 826–840 mm high worktop 46 mm long screw feet should be fitted in place of those supplied with the machine. To integrate an appliance under an 870–885 mm high worktop one raising kit is required. To integrate an appliance under an 915–930 mm high worktop two raising kits are required. The raising kit is a metal frame which is bolted to the base of the machine and increases the height of the machine by 50 mm. For installation under 825 mm to 869 mm high worktops you will need to secure a suitable thickness plywood base to the floor under the machine. Furniture door panel dimensions: Width: 592–596 mm Thickness: 17–19 mm (corresponding to the thickness of the adjacent unit door front panels) Height: The height of the door front panel corresponds to the door height of the adjacent units. * Stacking kits, longer screw feet and raising kits are available to order from the Miele Spare Parts Department Drying Basket (TK 111) Drying Basket that allows items which don’t tolerate excessive tumbling, to be dried safely. Ideal for drying sports shoes and even cuddly toys! SUITABLE FOR THE FOLLOWING MODELS T 7000 & T 8000 series tumble dryers PART NUMBER 6407550 49
Page 1 and 2: Miele Laundry. Experience the diffe
Page 3 and 4: Contents 100 years of washing Page
Page 5 and 6: Sound levels Some of the quietest a
Page 7 and 8: Porcelain enamel Miele is the last
Page 9 and 10: Saving energy Miele washing machine
Page 11 and 12: Gentle drying The patented Miele tu
Page 13 and 14: Hygiene Effectively deactivates dus
Page 15 and 16: Intelligent programming 1 Intellige
Page 17 and 18: Miele added value 1 Filter The filt
Page 19 and 20: Short wash Every programme has a bu
Page 21 and 22: Convenience and longevity 1 Intelli
Page 23 and 24: Intelligent technology always one s
Page 25: Low temperature Lower temperatures
Page 28 and 29: 28 Miele Young Style W 1000 & T 700
Page 31 and 32: Introducing Miele Young Style …ge
Page 33 and 34: Classic design With a combination o
Page 35 and 36: Energy efficiency rating Energy con
Page 39 and 40: High-End freestanding 8 kg capacity
Page 43 and 44: Energy efficiency rating Energy eff
Page 45 and 46: Space saving Where there is too lit
Page 47: Energy efficiency rating Energy con
Page 51 and 52: Miele Model no T 7644 C T 8822 C T
Page 53 and 54: Miele Model no W 1614 W 5740 W 5748
Page 55 and 56: Miele support and other Miele produ

Miele Laundry. Experience the difference. Edition 5 - Euro Appliances

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?